Panasonic WJ-SX 150 manual To Record the Camera Images in Maximum Recording Rate, Ext

Notes:

•You cannot record the camera images in maximum recording rate through this connection. Refer to the next connection example in this page.

•The recorder will not operate if its unit address is set to other than 1.

●To Record the Camera Images in Maximum Recording Rate

The following is the description of the connection between a recorder and this unit for the maximum-rate recording.

1.Set the unit address of the recorder to 1. Then, set the recorder’s CAMERA GENLOCK to ON in its SETUP MENU. (Refer to the recorder's operating instructions.)

2.Connect the unit’s CAM OUT 1 to 16 connectors to the recorder’s VIDEO IN 1 to 16 connectors with a coaxial cable.

3.Connect the unit’s EXT IN connector to the recorder’s GENLOCK OUT connector with a coaxial cable.

4.Connect the unit’s DATA HDR connector to the recorder’s DATA port with a modular cable.

(The control data and alarm signal will be output from the unit to the recorder.)

5.After the connection, set the unit’s EXT IN to GENLOCK ON through SETUP MENU or WJ-SX150 Administrator Console (Refer to pp. 60 or 66).

Notes:

•You need WJ-HD500A or a newer model for the maxi- mum-rate recording.

•The playback, multiscreen output or live images from the recorder are not displayed on Monitor 1 to 4. To confirm the images, you need to connect another monitor with the recorder.

•The recorder will not operate if its unit address is set to other than 1.

•Make sure the DATA HDR port's unit address is set to 1 through WJ-SX150 Administrator Console. (Refer to p. 66.) If another number is selected, you cannot control the recorder.

	WJ-SX150 Matrix Switcher														EXT IN
														EXT IN		3	1
					ALARM				SERIAL					(PLAY IN)
											RS485(CAMERA)			CAMERA
					TERM		DATA HDR DATA 4	DATA 3	DATA 2	DATA 1		LINE		SW IN
											2	SELECT	4
					OFF	ON
														EXT OUT		4	2
	16						PS•DATA		RS485(CAMERA)					(REC OUT)	3	MONITOR OUT
		15	14	13	12	11	10	9	8	7	6		5	4		2	1
	IN
	OUT
	16	15	14	13	12	11	10	9	8	7	6		5	4	3	2	1
								CAMERA
							DATA HDR
								DATA
MULTI	IN		EXT STORAGE					COPY				GEN-LOCK OUT			SIGNAL GND
												REMOTE(WV-CU50)
SCREEN	SPOT									DATA			SERIAL			10/100BASE-T
	OUT
OUT	16	15	14	13	12	11	10	9	8	7	6	5		4	3	2	1
	OUT			CONTROL			ALARM		MODE
	MULTI SCREEN OUT AUDIO
	IN
	OUT
	16	15	14	13	12	11	10	9	8	7	6	5		4	3	2	1
								VIDEO
	WJ-HD500A or a newer model															GENLOCK
																OUT

Monitor

42