Panasonic WJ-SX 150 manual Auto Log-in, Auto Log-out

■Log-out

This operation is skipped when the auto log-out is set to ON.

This function is used when an operator leaves the controller or no longer requires access to the system.

1.To logout from the system press the CLEAR button while holding down the SHIFT button.

"NO USER" appears on the LED display of the con- troller.

■Auto Log-in

If the auto log-in is set to ON, any operator can login auto- matically. After the controller is turned on, "AUTO" appears on the LED display for approximately 2 seconds, then "READY" automatically appears.

Auto log-in is configurable through WJ-SX150 Administrator Console. (Refer to p. 77 Auto Login/Logout.)

				CALL
TOUR SEQ	T&D	CAM ID	EVENT	PRESET
	STILL	AUX1 OFF	AUX1 ON	PROGRAM
				PRESET
NEXT	MON STATUS	ALL
	EL-ZOOM	AUX2 OFF	AUX2 ON	AUTO PAN
PAUSE	ALM H	VLD H	SYS S	CAM FUNC
PAUSE	SEQUENCE	DEF OFF	DEF ON
	MON (ESC)		CAM (SET)	CLEAR
SHIFT	MON LOCK	MULTI SCREEN SEL	WIPER	LOG OUT

Notes:

•If you want to save the power consumption, discon- nect the PC plug from the controller, and remove the AC adapter from the AC outlet.

•If the auto log-out is set to ON, any operator can logout automatically if no operation takes place for a specific time. "NO USER" automatically appears on the LED display.

•The time to logout is configurable through WJ- SX150 Administrator Console. (Refer to p. 77 Auto Login/Logout.)

■Auto Log-out

If the auto log-out is set to ON and no operation takes place for a specific time, any operator can logout automatically. "NO USER" automatically appears on the LED display.

Auto log-out and the time to logout are configurable through WJ-SX150 Administrator Console. (Refer to p. 77 Auto Login/ Logout.)

89