130 | Panasonic WJ-SX 150 instruction

Problem

Check item

Remedy

The alarm mode is not activated.

The alarm mode is set to OFF.	Set the alarm mode to SEQUENCE or
	HOLD in SETUP MENU or WJ-SX150
	Administrator Console.
	SETUP MENU: Refer to p. 52.
	Adminstrator Console: Refer to p. 64.

The port for an alarm input is set to	Set the alarm port to ON in SETUP
OFF.	MENU or WJ-SX150 Administrator
	Console.
	SETUP MENU: Refer to p. 52
	Administrator Console: Refer to p. 64.

When "ALM SUSPENDED" is displayed	Press the ACK/SUSPEND button while
on the monitor, the alarm is suspended.	holding down the SHIFT button to can-
	cel the alarm suspension.

SETUP MENU may be open.

Press the SETUP button while holding down the SHIFT button to close SETUP MENU.

ACK or RESET is not activated.

You may not have selected the alarm- related monitor.

Select the monitor again. (Refer to p. 90.)

The system controller is not authorized to select the monitor.

Confirm the Monitor Selection window in WJ-SX150 Administrator Console and reconfigure the setting if necessary. (Refer to p. 76.)

You are not authorized to reset an alarm.

Confirm the Level Table window in WJ- SX150 Administrator Console and reconfigure the setting if necessary. (Refer to p. 76.)

While the PROHIBITED indicator is lighting on the system controller, you are prohibited to control the monitor.

Open the Level Table (refer to p. 76) or Monitor Selection window (refer to p.

76)and reconfigure the setting if neces- sary.

Timer event is not activated.

A higher-priority operator may have	Select another monitor.
selected the event-related monitor.

SETUP MENU does not open.	When the PROHIBITED indicator is light-	Open the Level Table window (refer to
	ing on the system controller, you are pro-	p. 76) and reconfigure the setting.
	hibited to open SETUP MENU.

The system does not enter the record-	The recorder connection may be	Connect the recommended recorder to
ing mode.	wrong.	the unit.

The connected recorder may not con- form to the unit.

Confirm the recorder connection (refer to pp. 41 to 46.)

You are not authorized to operate the recorder.

Open the Level Table window (refer to p. 76) and reconfigure the setting.

130

Image 126

Panasonic WJ-SX 150 manual 130

Contents

Operating Instructions English Version Important Safety Instructions Contents Operating Procedures PS·DATA Camera Site Accessories ControlAlarm Control When Using a PS·DATA System Controller Features Preface Do not drop metallic parts through slots PrecautionsDocument Convention Do not attempt to disassemble the appliance Features of the Matrix Switcher System Monitoring Mode Matrix Switcher System DescriptionsCrosspoint Switches Spot Mode About System Controller Sequence ModeSystem Control Camera control Example of a System with Basic Functions Monitor Terminal Mode Descriptions Log-in/Log-outOperator Registration Display Position Monitor-related FunctionsMonitor Selection Priority Lock Multiscreen Display 4, 9, and 16 Screens Operating Zoom Lens Housing ControlCamera-related Functions Camera Selection External Equipment Control Alarm-related FunctionsCamera Cleaning Controllable Camera-related Functions Timer Event Extended Functions Setup ProceduresSystem Status Table Recorder Connection Multiscreen display Alarm priority modeMultiplexer Board Function Still display Digital Disk Recorder WJ-HD100 Series/Time-lapse VCR Motion Detector Notification about PS·DATA Controller Operation Detailed Product Description SX150 Software Upload WJ-SX150 Matrix SwitcherFront View Multiplexer Software Upload Rear View WV-CU360C System Controller Terminal Mode Preset $5Previous button Prev 2Setup button Setup$4Next button Next $6Recorder button Recorder WV-CU360CJ System Controller Terminal Mode 4Alarm Acknowledge button ACK/SUSPEND 7Call Preset button Call PRESET/PROGRAM3Alarm Reset button RESET/ALL Reset 2Joystick 6Tour Sequence button Tour SEQ 5Function 1 button F1/CAM Setup7Setup button Setup 7Group Sequence button Group SEQ Data ports Data 8Controller Number switch Controller No9Mode Selection switches Mode 1DC 9V Input jack DC 9V Installations and System Connections Installations Installing the Multiplexer BoardMounting into the Rack System Expansion Connection System Connection ExamplesBasic System Connection Connection with Digital Disk Recorder WJ-HD500 Series Camera Max Camera Inputs Alarm Inputs Connections Connection with the Camera Sites Connections for RS-485 Type Camera Home Run WiringDaisy Chain Wiring RS485 Port Connection with the Monitors Connection with the Alarm Sensors Connection with the System ControllersDATA1 to DATA4 Port Connection with the Alarm Output Connection with Digital Disk Recorder WJ-HD500 SeriesTo Confirm the Images from a Recorder Connected to the Unit To Record the Camera Images in Maximum Recording Rate EXT To Control a Recorder via the Network EXT Monitor OUT Data bit 8 bits Parity check None Stop bit 1 bit Connection with Digital Disk Recorder WJ-HD100 SeriesData HDR Port Data HDR Port Connection with the Time-lapse VCR Panasonic Models Parity check ODD Stop bit 1 bit Cable Specifications Connection with the Time-lapse VCR Non-Panasonic Models Master Clock Connection Example for Time Adjustment Time Adjustment with an External EquipmentCable Specifications Connection with the PC WJ-SX150 Setup Procedures Sequence Settings Setup ProceduresDescription of Setup Procedures Schedule Settings Setup File Operation Operator SettingsSystem Settings WJ-SX150 Administrator Console Configuration Programming Setup Menu WJ-SX150 Setup Menu OSDDisplaying Setup Menu Numeric buttons Enters numerals Month How to DisplayParameters Day · D. S. T.... Summer Time Time T. Daylight Saving TimeYear Minute Alarm Mode Alarm EventDwell Alarm Input Camera Alarm PortSerial Port MUX Motion DET How to edit Camera Title With the Multiplexer board Recorder ControlWithout the Multiplxer board Recorder Unit Address PSD/HDR Port Speed RS485 Camera SetupDATA4/PSD Port Select Serial Port Speed Operator no Camera CleaningPassword Priority Dynamic REC AlarmNormal Dummy Black WJ-SX150 Administrator Console Description of WJ-SX150 Administrator ConsoleInstallation/Uninstallation Main Window Startup/Termination Recorder Unit Address Cancel Exit buttonPut a File to SX150 OK button Tour Sequence Get a Configuration Data from SX150Preset Cam Group Sequence Enable Schedule Mode GroupAction Group Auto Cleaning Camera Camera CleaningCamera Auto Cleaning Daylight Saving Time/Summer Time Alarm Mode Alarm Input GroupCamera Serial Port Sensitivity Alarm Event Alarm Port Operator Registration Level Table Monitor Selection Auto Login/Logout Auto Log-in/Log- out Time & Date Clock How to displayCable Compensation/VD2/DATA Parameters Camera Title Edit Camera Title To Copy a Character Edit Font WindowTo Edit a User Font Character To Delete a Character Data Port RS-485 Port GroupFixed Common Parameter Group Multi Monitor Out Group Multiplexer ModeHow to Display Parameters REC OUT Group Mux Alarm Group Alarm GroupSystem Group Select Setup Data File Multiplexer Title How to Display Account Manager Edit Account Manager Communication Port Parameter GroupFixed Parameter Group Operating Procedures Terminal Mode LOG-IN and LOG-OUT Log-in Log-out Auto Log-inAuto Log-out Applying Priority Lock Monitor Selection and Camera SelectionPriority Lock Releasing Priority Lock Camera Selection Pan/Tilt Control Camera ControlLens Control Manual Operation Program Preset Position Call Preset Position Camera Setup Camera Function ControlCamera Function Shortcut Function Changing to Black and White Images Patrol Learn and Play Camera Panning Function Receiver Control Camera Site Accessories ControlCamera Housing Control Auxiliary Control Running Sequence Monitor Display Control On-screen Display OSD ControlOn-screen Display OSD Position Control Moving the Monitor Status 100Moving the Event Display Moving All the Items Alarm History Table 101Video Loss History Table Operation of an Alarm-related Camera ACK Alarm ControlOperating during an Alarm Mode 102 Alarm Reset Alarm All Reset Resetting the Alarm InputsSuspending the Alarm Inputs 103 Multiplexer Operations 104Monitoring the Camera Picture 105 Electronic Zooming EL-ZOOM 107 When Using a PS·DATA System Controller 108 Monitor Control 109 110 111 Suspending All the Alarm Inputs Operation during an Alarm ModeResetting All the Alarm Inputs 112 113 Controlling the Unit with a PS·Data System Controller Expanded Function 115 Recorder Mode WJ-HD500 Series Control Terminal ModeDisplaying WJ-HD500 Series Setup Menu 116 117 Normal Playback 118 Manual RecordingSearch Playback 119 Other Operations 120 WJ-HD100 Series Control Terminal ModeDisplaying WJ-HD100 Series Setup Menu Controlling Digital Disk Recorder WJ- HD100 Series Alarm Recall table 121Date-and-time entry form To Operate Multiscreen Display 122Controlling the Time-lapse VCR Fast-forward 123 To Operate the Multiscreen Display WJ-HD500 Series Control PS·DATA 124Controlling the Recorder with a PS·Data System Controller WJ-HD100 Series Control PS·DATA 125 TIME-LAPSE VCR Control PS·DATA 126 127 Monitor Display When a Video Loss OccursCamera Switching Pulse Loss Display Video Loss Display Troubleshooting 128 129 130 Appendix 131 Communication Protocol Transmission CommandResponse Command 132 Command Table Basic Operation Alarm Control Setup Control134 135 PAN/TILT Setup Menu 136 137 Recorder Control 138 REW 139 Inquiry 140 Miscellaneous Control Error Code List Matrix switcher and external devices141 Instruction Worksheets142 Team Work Recorder Checklist143 Tour Sequence 144 Group Sequence 145 Timer EventCamera Auto Cleaning Daylight Saving Time Alarm Port Alarm ModeAlarm Event 146 147 Level Table 148 Auto Log-in/Log-outCable Compensation/VD2 149 Data Port 150 ALM Specifications Standard Accessories151 Panasonic Digital Communications & Security Company