CAMERA FUNCTION CONTROL
■Camera Setup
1.Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.)
2.Press the F1 button while holding down the SHIFT but- ton.
The CAM SETUP indicator on the controller will light up and the camera's SETUP MENU will appear on the active monitor.
F1 | ACK | RESET |
|
|
|
|
CAM SETUP | SUSPEND | ALL RESET |
|
|
| CALL |
|
|
|
|
|
| |
F2 | GROUP SEQ | TOUR SEQ | T&D | CAM ID | EVENT | PRESET |
INDEX | REW/FF | STILL | AUX1 OFF | AUX1 ON | PROGRAM | |
|
|
|
|
|
| PRESET |
| PREV | NEXT | MON STATUS | ALL |
|
|
| STEP |
| AUX2 OFF | AUX2 ON | AUTO PAN | |
RECORDER |
|
| ||||
STOP |
| PAUSE | ALM H | VLD H | SYS S | CAM FUNC |
|
|
|
|
|
| |
STOP | PLAY | PAUSE | SEQUENCE | DEF OFF | DEF ON |
|
| OSD |
| MON (ESC) |
| CAM (SET) | CLEAR |
SETUP |
| SHIFT | MON LOCK | MULTI SCREEN SEL | WIPER | LOG OUT |
3.To select the desired item in the menu, move the joy- stick to ▼ or ▲. To select the desired parameter (or mode) in the menu, move the joystick to t or s.
4.To execute the currently highlighted selection and to enter a submenu of SETUP MENU, press the CAM (SET) button.
5.To leave from the currently selected menu and to return to the previous page of the menu, press the MON (ESC) button.
6.Move the cursor to SPECIAL on the camera’s setup menu, and press numeric buttons 4 and 6 simultane- ously for 2 seconds or more to display the special menu.
7.Move the cursor to CAMERA RESET on the camera’s setup menu, and press buttons 4, 5 and 6 simultane- ously to reset all the functions to the defaults.
Notes:
•Refer to the operating instructions of the selected camera for details.
•Move the joystick while holding down the SHIFT button to move the camera smoothly for presetting the positions in the camera's SETUP MENU.
8.To close the camera's SETUP MENU, press the F1 but- ton while holding down the SHIFT button.
The CAM SETUP indicator goes off.
■Camera Function (Shortcut Function)
The following function is available only when specified cam- eras with the camera function feature are used.
This function enables executing camera functions via a shortcut.
1.Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.)
2.Press the AUTO PAN button while holding down the SHIFT button.
"F_ _ _ _" will appear on the LED display of the con- troller as shown in the figure.
F1 | ACK | RESET |
|
|
|
|
CAM SETUP | SUSPEND | ALL RESET |
|
|
| CALL |
|
|
|
|
|
| |
F2 | GROUP SEQ | TOUR SEQ | T&D | CAM ID | EVENT | PRESET |
INDEX | REW/FF | STILL | AUX1 OFF | AUX1 ON | PROGRAM | |
|
|
|
|
|
| PRESET |
| PREV | NEXT | MON STATUS | ALL |
|
|
| STEP |
| AUX2 OFF | AUX2 ON | AUTO PAN | |
RECORDER |
|
| ||||
STOP |
| PAUSE | ALM H | VLD H | SYS S | CAM FUNC |
|
|
|
|
|
| |
STOP | PLAY | PAUSE | SEQUENCE | DEF OFF | DEF ON |
|
| OSD |
| MON (ESC) |
| CAM (SET) | CLEAR |
SETUP |
| SHIFT | MON LOCK | MULTI SCREEN SEL | WIPER | LOG OUT |
3.Press the numeric buttons to select an assigned func- tion number, then press the CAM (SET) button.
For example, enter 175 for AGC ON.
The selected function will be executed on the active monitor.
Notes:
•When you select a wrong number, press the CLEAR button to clear the numeric input.
•Refer to the cameras' operating instructions for details on available shortcuts.
4.To exit from the mode, press the MON (ESC) button then press the AUTO PAN button while pressing the SHIFT button.
94
