Panasonic WJ-SX 150 manual Serial Port, Sensitivity

Models: WJ-SX 150

1 148
Download 148 pages 2.06 Kb
Page 71
Image 71

REC ONLY: Only an alarm recording will start and monitors will keep displaying the current sequence/spot images.

Note: You cannot recover alarm-related operations from system controllers when REC ONLY is selected.

OFF: An alarm input is accepted neither via the CAM- ERA IN connectors nor the RS-485 ports.

The factory default setting is OFF.

Alarm Port

This stands for that an alarm input is accepted via the ALARM port (25-pin D-sub connector) at the rear panel.

ON: The alarm-associated sequence/spot image is dis- played on a monitor, and alarm recording will start (if a recorder is connected to the unit).

REC ONLY: Only an alarm recording will start and monitors will keep displaying the current sequence/spot images.

Note: You cannot recover alarm-related operations from system controllers when REC ONLY is selected.

OFF: An alarm input is not accepted via the ALARM port.

The factory default setting is ON.

Serial Port

This stands for that an alarm input is accepted via the SERIAL port.

ON: The alarm-associated sequence/spot image is dis- played on a monitor, and alarm recording will start (if a recorder is connected to the unit).

REC ONLY: Only an alarm recording will start and monitors will keep displaying the current sequence/spot images.

Note: You cannot recover alarm-related operations from system controllers when REC ONLY is selected.

OFF: An alarm input is not accepted via the SERIAL port.

The factory default setting is ON.

MUX MOTION DET ON: This stands for that the unit’s motion detector is activated. When a camera detects the brightness-level change and transmit an alarm signal, the alarm-associated sequence/spot image is displayed on a monitor, and alarm record- ing will start (if a recorder is connected to the unit).

ON: The alarm-associated sequence/spot image is dis- played on a monitor, and alarm recording will start (if a recorder is connected to the unit.)

REC ONLY: Only an alarm recording will start and monitors will keep displaying the current sequence/spot images.

Note: You cannot recover alarm-related operations from system controllers when REC ONLY is selected.

OFF: An alarm input is not accepted by the motion detector.

The factory default setting is OFF.

Note: MUX MOTION DET is configurable only when Yes is selected in the Recorder (refer to p. 66) window.

Sensitivity: When you click this button, the Sensitivity win- dow will appear.

Sensitivity

When you press this button, the Sensitivity window will appear. In this window, you can configure the sensitivity level of the multiplexer motion detector on each camera channel.

OFF: The motion detector is not activated on the cam- era channel.

LOW: The sensitivity level is low.

MID: The sensitivity level is medium.

HIGH: The sensitivity level is high.

The factory default setting of all the channels is LOW.

73

Page 71
Image 71
Panasonic WJ-SX 150 manual Serial Port, Sensitivity