76
■Level TableThis window configures the restrict level of each operation.
The restrict level is classified in Level 1, 2, and 3.
●How to Display
To display this window, click on the (Level Table) but-
ton in the main window (p. 65).
●Parameters
• Permission
Click on each checkbox to classify the following operations
by three levels.
SX150 Setup:Setting up this matrix switcher system
Camera Setup:Setting up the cameras
Alarm History Display:Displaying the alarm history
Video Loss History Display:Displaying the video loss
history
System Status Display:Displaying the system status
Single Alarm Reset:Resetting an alarm
All Alarm Reset:Resetting all the alarms
Alarm Suspend:Suspending an alarm
Camera View:Selecting a camera
Call Sequence:Activating a tour or group sequence
Program Preset Position: Registering a camera's pre-
set position
OSD Control: Displaying SETUP MENU
Camera Control:Controlling a camera
Recorder Control:Controlling the recorder
Recorder Setup: Displaying the recorder's setup menu
(Save Exit) button:
Saves the configuration and closes the Level Table window.
(EXIT) button
Cancels the configuration and closes the Level Table win-
dow.
■Monitor SelectionThis window determines whether a system controller or PC
can select a monitor.
●How to Display
To display this window, click on the (Monitor
Selection) button in the main window (p. 65).
●Parameters
Select OK to permit each controller and the PC to control
Monitor 1 to 4.
Select NG to restrict each controller and the PC to control
Monitor 1 to 4.
(Save Exit) button
Saves the configuration and closes the Monitor Select win-
dow.
(Cancel Exit) button
Cancels the configuration and closes the Monitor Select
window.