TIME-LAPSE VCR CONTROL [PANASONIC MODELS] (TERMINAL MODE)
A
Note: Before the use, it is necessary to install the Multiplexer board in the matrix switcher, connect the matrix switcher to the
ISTRATOR CONSOLE.]
The following is the procedure of a Panasonic model time- lapse VCR.
■Controlling the Time-lapse VCR
The following are the operating procedures of the time- lapse VCR via System Controller
●To Operate Multiscreen Display
The operations are the same as
●Manual Recording
The operations are the same as
●Normal Playback
The operations are the same as
●Fast-forward
1.Press the FF button to
2.To stop
Note: Pressing the FF button during
●Rewind
1.During the stop, press the REW button to rewind the tape.
2.Press the STOP button to stop rewinding.
Note: Pressing the PLAY button during rewind will start playback.
●Forward or Backward Search
The recorded images can be searched at variable speeds. This function is available during the playback or playback pause. (Refer to p. 117 Normal Playback.)
Move the joystick rightward or leftward to search images. Joystick to R (B)/FF (
): Search forward Joystick to L (A)/REW (
): Search backward
The joystick inclination can control the forward/backward search speed.
During the search noise may appear on the image.
●Forward or Backward Field Advance
The recorded images can be searched field by field. During the pause, move the joystick rightward or leftward to advance an image field by field.
Joystick to R (B)/STEP ( 
): Forward field
advance
Joystick to L (A)/STEP (
): Backward field
advance
Note: Index is unvaibable for
