
■Camera Panning Function
There are three panning modes available as follows: auto pan, sort mode and sequence mode. Refer to p. 16
1.Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.)
2.Press the AUTO PAN button four times while holding down the SHIFT button.
"PAN" will appear on the LED display of the controller as shown in the figure.
4.To exit from the mode, press the MON (ESC) button, then press the AUTO PAN button while holding down the SHIFT button.
F1 | ACK | RESET |
|
|
|
|
CAM SETUP | SUSPEND | ALL RESET |
|
|
| CALL |
|
|
|
|
|
| |
F2 | GROUP SEQ | TOUR SEQ | T&D | CAM ID | EVENT | PRESET |
INDEX | REW/FF | STILL | AUX1 OFF | AUX1 ON | PROGRAM | |
|
|
|
|
|
| PRESET |
| PREV | NEXT | MON STATUS | ALL |
|
|
| STEP |
| AUX2 OFF | AUX2 ON | AUTO PAN | |
RECORDER |
|
| ||||
STOP |
| PAUSE | ALM H | VLD H | SYS S | CAM FUNC |
|
|
|
|
|
| |
STOP | PLAY | PAUSE | SEQUENCE | DEF OFF | DEF ON |
|
| OSD |
| MON (ESC) |
| CAM (SET) | CLEAR |
SETUP |
| SHIFT | MON LOCK | MULTI SCREEN SEL | WIPER | LOG OUT |
3.Press the assigned numeric button shown below to acti- vate the panning function of the selected camera.
The LED display indicates the selected mode as fol- lows.
1:Activates AUTO PAN "PA PA".
2:Activates SORT PAN "PA SO".
3:Activates SEQUENCE PAN "PA SE".
Note: The AUTO MODE parameter previously set in the camera's SETUP MENU will be automatically replaced to the activated function parameter.
96