
■Operator Registration
This window configures the parameters of each operator: the ID, password, level, priority and camera access.
Note: Before configuring this window, check on the restrict level of each operation in the Level Table window.
●How to Display
To display this window, click on the (Operator Registration) button in the main window (p. 65).
●Parameters
• Operator Number
This box displays a list of registered operators.
Timer: This operator is used for the priority change of a timer event. When the timer event's priority is higher than that of an operator, the event is valid. When an operator's priority is higher than that of a timer event, the event is invalid. This operator cannot be deleted.
• Add Operator Number
This
• Operator Group
This group configures each operator's password, level and priority.
ID: Enter an operator's ID. From 1 to 99999 are avail- able.
Password: Enter a password. From 1 to 99999 are available.
Level: Select 1, 2 or 3.
Priority: Select the operator's priority from 1 (highest) to 16 (lowest).
• Camera Access Group
This group configures the camera operation coverage of each operator.
Click on each camera's checkboxes and determine the available operation.
1 (View & Control): The operator can display the cam- era image on the monitor and control panning/tilt- ing.
2 (View Only): The operator can display the camera image on the monitor, but cannot control the pan- ning/tilting.
3 (Prohibited): The operator can neither display the camera image on the monitor nor control the pan- ning/tilting.
(Add) button
Adds a new operator to
(Edit) button
The registered parameters become editable by clicking on this button after selecting the operator number.
(Delete) button
Deletes an operator from
(OK) button
Saves the configuration and closes the Operator Registration window.
75