MUX Motion DET | Panasonic WJ-SX 150 instruction

• MUX MOTION DET

This menu appears only when the Multiplexer board is installed in the unit.

This stands for that the unit’s motion detector is activat- ed when a camera detects the brightness-level change and transmit an alarm signal.

ON: The alarm-associated sequence/spot image is dis- played on a monitor, and alarm recording will start (if a recorder is connected to the unit.)

REC ONLY: Only alarm recording will start and moni- tors will keep displaying the current sequence/spot images.

Note: You cannot recover alarm-related operations from system controllers when REC ONLY is selected.

OFF: An alarm input is not accepted by the motion detector.

To configure where to activate the motion detector, set MUX MOTION DET to ON or REC ONLY, and press the CAM (SET) button. The live image will be displayed.

Note: Black image will be displayed on the monitor if the currently selected channel has no camera con- nection.

A “+” mark appears at the center of the monitor.

+ Mark

The following is the setting procedure.

1.Move the cursor with the joystick to the desired area, and then press the CAM (SET) key. Setting point 1 is determined.

+

+

Setting point

2.Move the “+” mark to the desired area, and then press the CAM (SET) key. Setting point 2 is determined and the “+” mark will disappear. Then, the mark will appear again at the center of the monitor. The square, covered

with Setting point 1 and 2, is showing the motion-detec- tion area.

Note: White images will be displayed in the square if the currently selected channel has no camera connection.

Setting point 2

+

Setting point 1

3.To configure more motion-detection area, repeat Step 1 and 2.

Up to 4 motion-detection areas are available.

58

Image 56

Panasonic WJ-SX 150 manual MUX Motion DET

Contents

Operating Instructions English Version Important Safety Instructions Contents Camera Site Accessories Control Alarm ControlOperating Procedures PS·DATA When Using a PS·DATA System Controller Features Preface Precautions Document ConventionDo not drop metallic parts through slots Do not attempt to disassemble the appliance Features of the Matrix Switcher System Matrix Switcher System Descriptions Crosspoint SwitchesMonitoring Mode Spot Mode Sequence Mode System ControlAbout System Controller Camera control Example of a System with Basic Functions Monitor Operator Registration Terminal Mode DescriptionsLog-in/Log-out Monitor-related Functions Monitor SelectionDisplay Position Priority Lock Operating Zoom Lens Housing Control Camera-related FunctionsMultiscreen Display 4, 9, and 16 Screens Camera Selection Alarm-related Functions Camera CleaningExternal Equipment Control Controllable Camera-related Functions Timer Event Setup Procedures System Status TableExtended Functions Recorder Connection Alarm priority mode Multiplexer Board FunctionMultiscreen display Still display Digital Disk Recorder WJ-HD100 Series/Time-lapse VCR Motion Detector Notification about PS·DATA Controller Operation Detailed Product Description WJ-SX150 Matrix Switcher Front ViewSX150 Software Upload Multiplexer Software Upload Rear View WV-CU360C System Controller Terminal Mode Preset 2Setup button Setup $4Next button Next$5Previous button Prev $6Recorder button Recorder WV-CU360CJ System Controller Terminal Mode 7Call Preset button Call PRESET/PROGRAM 3Alarm Reset button RESET/ALL Reset4Alarm Acknowledge button ACK/SUSPEND 2Joystick 5Function 1 button F1/CAM Setup 7Setup button Setup6Tour Sequence button Tour SEQ 7Group Sequence button Group SEQ 8Controller Number switch Controller No 9Mode Selection switches ModeData ports Data 1DC 9V Input jack DC 9V Installations and System Connections Mounting into the Rack InstallationsInstalling the Multiplexer Board System Connection Examples Basic System ConnectionSystem Expansion Connection Connection with Digital Disk Recorder WJ-HD500 Series Camera Max Camera Inputs Alarm Inputs Connections Connection with the Camera Sites Home Run Wiring Daisy Chain WiringConnections for RS-485 Type Camera RS485 Port Connection with the Monitors DATA1 to DATA4 Port Connection with the Alarm SensorsConnection with the System Controllers To Confirm the Images from a Recorder Connected to the Unit Connection with the Alarm OutputConnection with Digital Disk Recorder WJ-HD500 Series To Record the Camera Images in Maximum Recording Rate EXT To Control a Recorder via the Network EXT Monitor OUT Connection with Digital Disk Recorder WJ-HD100 Series Data HDR PortData bit 8 bits Parity check None Stop bit 1 bit Data HDR Port Connection with the Time-lapse VCR Panasonic Models Parity check ODD Stop bit 1 bit Cable Specifications Connection with the Time-lapse VCR Non-Panasonic Models Time Adjustment with an External Equipment Cable SpecificationsMaster Clock Connection Example for Time Adjustment Connection with the PC WJ-SX150 Setup Procedures Setup Procedures Description of Setup ProceduresSequence Settings Schedule Settings Operator Settings System SettingsSetup File Operation WJ-SX150 Administrator Console Configuration WJ-SX150 Setup Menu OSD Displaying Setup MenuProgramming Setup Menu Numeric buttons Enters numerals How to Display ParametersMonth Day · D. S. T.... Summer Time T. Daylight Saving Time YearTime Minute Dwell Alarm ModeAlarm Event Serial Port Alarm Input CameraAlarm Port MUX Motion DET How to edit Camera Title Recorder Control Without the Multiplxer boardWith the Multiplexer board Recorder Unit Address RS485 Camera Setup DATA4/PSD Port SelectPSD/HDR Port Speed Serial Port Speed Camera Cleaning PasswordOperator no Priority Alarm NormalDynamic REC Dummy Black Installation/Uninstallation WJ-SX150 Administrator ConsoleDescription of WJ-SX150 Administrator Console Main Window Startup/Termination Recorder Cancel Exit button Put a File to SX150Unit Address OK button Get a Configuration Data from SX150 PresetTour Sequence Cam Group Sequence Action Group EnableSchedule Mode Group Camera Cleaning Camera Auto CleaningAuto Cleaning Camera Daylight Saving Time/Summer Time Camera Alarm ModeAlarm Input Group Serial Port Sensitivity Alarm Event Alarm Port Operator Registration Level Table Monitor Selection Auto Login/Logout Auto Log-in/Log- out Time & Date How to display Cable Compensation/VD2/DATAClock Parameters Camera Title Edit Camera Title Edit Font Window To Edit a User Font CharacterTo Copy a Character To Delete a Character Fixed Common Parameter Group Data PortRS-485 Port Group Multiplexer Mode How to Display ParametersMulti Monitor Out Group REC OUT Group System Group Mux Alarm GroupAlarm Group Select Setup Data File Multiplexer Title How to Display Account Manager Edit Account Manager Fixed Parameter Group Communication PortParameter Group Operating Procedures Terminal Mode LOG-IN and LOG-OUT Log-in Auto Log-out Log-outAuto Log-in Monitor Selection and Camera Selection Priority LockApplying Priority Lock Releasing Priority Lock Camera Selection Camera Control Lens ControlPan/Tilt Control Manual Operation Program Preset Position Call Preset Position Camera Function Shortcut Function Camera SetupCamera Function Control Changing to Black and White Images Patrol Learn and Play Camera Panning Function Camera Site Accessories Control Camera Housing ControlReceiver Control Auxiliary Control Running Sequence On-screen Display OSD Position Control Monitor Display ControlOn-screen Display OSD Control 100 Moving the Event DisplayMoving the Monitor Status Moving All the Items Video Loss History Table Alarm History Table101 Alarm Control Operating during an Alarm ModeOperation of an Alarm-related Camera ACK 102 Resetting the Alarm Inputs Suspending the Alarm InputsAlarm Reset Alarm All Reset 103 Monitoring the Camera Picture Multiplexer Operations104 105 Electronic Zooming EL-ZOOM 107 When Using a PS·DATA System Controller 108 Monitor Control 109 110 111 Operation during an Alarm Mode Resetting All the Alarm InputsSuspending All the Alarm Inputs 112 113 Controlling the Unit with a PS·Data System Controller Expanded Function 115 WJ-HD500 Series Control Terminal Mode Displaying WJ-HD500 Series Setup MenuRecorder Mode 116 117 Normal Playback Search Playback 118Manual Recording 119 Other Operations WJ-HD100 Series Control Terminal Mode Displaying WJ-HD100 Series Setup Menu120 Controlling Digital Disk Recorder WJ- HD100 Series Date-and-time entry form Alarm Recall table121 122 Controlling the Time-lapse VCRTo Operate Multiscreen Display Fast-forward 123 To Operate the Multiscreen Display Controlling the Recorder with a PS·Data System Controller WJ-HD500 Series Control PS·DATA124 WJ-HD100 Series Control PS·DATA 125 TIME-LAPSE VCR Control PS·DATA 126 Monitor Display When a Video Loss Occurs Camera Switching Pulse Loss Display127 Video Loss Display Troubleshooting 128 129 130 Appendix 131 Transmission Command Response CommandCommunication Protocol 132 Command Table Basic Operation 134 Alarm ControlSetup Control 135 PAN/TILT Setup Menu 136 137 Recorder Control 138 REW 139 Inquiry 140 Miscellaneous Control 141 Error Code ListMatrix switcher and external devices Worksheets 142Instruction Team Work Checklist 143Recorder Tour Sequence 144 Group Sequence Timer Event Camera Auto Cleaning145 Daylight Saving Time Alarm Mode Alarm EventAlarm Port 146 147 Level Table Cable Compensation/VD2 148Auto Log-in/Log-out 149 Data Port 150 ALM 151 SpecificationsStandard Accessories Panasonic Digital Communications & Security Company