■Resetting the Alarm Inputs
There are two alarm reset functions:
•Alarm reset (resetting the alarm inputs according to the input order)
•Alarm all reset (resetting all the alarm inputs)
RESET |
|
|
|
ALL RESET |
|
|
|
TOUR SEQ | T&D | CAM ID | EVENT |
| STILL | AUX1 OFF | AUX1 ON |
●Alarm Reset
●Alarm All Reset
RESET |
|
|
|
ALL RESET |
|
|
|
TOUR SEQ | T&D | CAM ID | EVENT |
| STILL | AUX1 OFF | AUX1 ON |
NEXT | MON STATUS | ALL |
|
| AUX2 OFF | AUX2 ON | |
PAUSE | ALM H | VLD H | SYS S |
PAUSE | SEQUENCE | DEF OFF | DEF ON |
| MON (ESC) |
| CAM (SET) |
SHIFT | MON LOCK | MULTI SCREEN SEL | WIPER |
1.Select a monitor which displays "ALARM".
2.When more than one alarm signal has been input, the second earliest alarm image appears on the monitor, after the current alarm image is reset.
3.To reset all the alarms, repeat steps 1 and 2. The moni- tor, the LED display and the indicator will change as fol- lows:
"ALARMnn" will disappear from the monitor.
The LED display will return to the state before the alarm input.
The alarm indicator will go out.
The CAM indicator will return to the state before the alarm input.
•Description about alarm reset
Time
Alarm Alarm input 2
Alarm input 5 input 1
Matrix switcher
ALARM01*
Monitor 1
RESET
ALL RESET
ALARM05*
RESET
ALL RESET
ALARM02
Monitor 1
Note: When more than one alarm is input and they are associated with the same monitor, they will be reset one by one.
1.Press the RESET button while holding down the SHIFT button.
2.The monitor, the LED display and the indicator will change as follows:
"ALARMnn" will disappear from the monitor.
The LED display will return to the state before the alarm input.
The alarm indicator will go out.
The CAM indicator will return to the state before the alarm input.
■Suspending the Alarm Inputs
Use this function when you do not want to be disturbed by an alarm input, for example, during the setup procedures.
ACK | RESET |
|
|
SUSPEND | ALL RESET |
|
|
GROUP SEQ | TOUR SEQ | T&D | CAM |
REW/FF | STILL | AUX1 O | |
PREV | NEXT | MON STATUS ALM SUSPENDED | |
STEP |
| AUX2 O | |
| PAUSE | ALM H | VLD |
PLAY | PAUSE | SEQUENCE | DEF O |
OSD |
| MON (ESC) |
|
| SHIFT | MON LOCK | MULTI SCRE |
1.Press the ACK/SUSPEND button while holding down the SHIFT button.
"ALM SUSPENDED" will appear on the monitor.
2.To cancel alarm suspension, press the ACK/SUSPEND button while holding down the SHIFT button again. "ALM SUSPENDED" will disappear from the monitor.
Notes:
•An alarm continues to operate even after it is suspend- ed.
•If you suspend an alarm while an alarm image is dis- played, "ALM SUSPENDED" will not appear on the moni- tor. Reset the alarm, and then suspend it again.
