WJ-SX150 SETUP MENU (OSD)
The
■Displaying SETUP MENU
To display SETUP MENU, follow the procedure below.
1.Confirm that the camera and peripherals are correctly and securely connected and that all components are turned on.
2.To execute the selection, select one of the monitors (1 to 4) by pressing the numeric button, then press the MON (ESC) button.
The MONITOR indicator will light up.
3.Press the SETUP button while holding down the SHIFT button on the system controller.
The tree of SETUP MENU is shown in the next page. Note: “x.xx” in SETUP MENU shows the firmware ver-
sion.
x.xx |
Joystick to L(A): Moves the cursor to the left.
Joystick to R (B): Moves the cursor to the right.
PREV button: Selects the previous mode or parameter.
NEXT button: Selects the next mode or parameter.
Numeric buttons: Enters numerals.
CLEAR button: Deletes a character when editing a camera title.
CAM (SET) button: Executes the selections and dis- plays a submenu for items with the (O) mark.
MON (ESC) button: Returns to SETUP MENU or the previous menu.
This operating instructions uses the symbols to describe the buttons.
4.To end the setting and return to the normal view, press the SETUP button while holding down the SHIFT button when SETUP MENU is displayed.
The system controller's SETUP indicator will go off.
Note: The Multiplexer board version, “900 MULTIPLEX- ER”, and “1000 MUX CAMERA TITLE” is displayed only when the Multiplexer board is installed in the unit.
■Programming SETUP MENU
As shown in the tree, SETUP MENU has seven main sub- menus:
SETUP SHIFT
100 | TIME&DATE | Aug | /21/2002 10:55 AM |
200 | D.S.T. | ON |
|
300SEQUENCEO
400ALARMO
500CAMERA TITLEO
600RECORDERO
700SYSTEMO
800OPERATOR REGISTRATIONO
(Without the Multiplexer board)*
* This is the factory default setting.
| x.xx/x.xx | ||
100 | TIME&DATE |
| /21/2002 10:55 AM |
Aug | |||
200 | D.S.T. | ON | |
300SEQUENCEO
400ALARMO
500CAMERA TITLEO
600RECORDERO
700SYSTEMO
800OPERATOR REGISTRATIONO
900 MULTIPLEXERO
1000 MUX CAMERA TITLEO
TIME & DATE, D. S. T., SEQUENCE SETUP, ALARM SETUP, CAMERA TITLE, SYSTEM SETUP and OPERATOR REGISTRATION.
SEQUENCE SETUP, ALARM SETUP, CAMERA TITLE, SYS- TEM SETUP and OPERATOR REGISTRATION are further divided into additional submenus.
The (O) mark indicates that the item has a submenu for more detailed setups.
Refer to the figure in next page for the composition of
SETUP MENU.
■TIME & DATE
| x.xx/x.xx | ||
100 | TIME&DATE |
| /21/2002 10:55 AM |
Aug | |||
200 | D.S.T. | ON |
|
(With the Multiplexer board)
The following functions and buttons are valid in SETUP MENU:
Joystick to UP(D): Moves the cursor up or returns to the previous page.
Joystick to DOWN(C): Moves the cursor down or dis- plays the next page.
300SEQUENCEO
400ALARMO
500CAMERA TITLEO
600RECORDERO
700SYSTEMO
800OPERATOR REGISTRATIONO
900MULTIPLEXERO
1000 MUX CAMERA TITLEO
52
