SETUP PROCEDURES

Setup Procedures

This unit has two setting procedures.

The one is SETUP MENU, which is the unit's on-screen dis- play (OSD).

The other is WJ-SX150 Administrator Console, which oper- ates on the PC.

 

Sequence settings

 

 

• Tour sequence

 

 

• Group sequence

 

 

Schedule settings

 

 

• Timer event

 

 

• Camera cleaning

 

 

• Daylight saving time

 

(PC)

Alarm settings

 

• Alarm mode

 

AdministratorConsole

• Alarm event

SETUPMENU(OSD)

• Cable compensation

 

• Alarm input/Alarm port

 

 

Operator settings

 

 

• Operator registration

 

 

• Level table

 

 

• Monitor select (Monitor selection)

 

 

• Auto login/logout (Auto log-in/log-out)

 

 

System settings

 

 

• Clock (Time and date) *1

 

-SX150

• Camera title

 

• Data port *2

 

Multiplxer board

 

WJ

 

 

• Recorder

 

• Multiplexer *3

 

 

• Mux (Multiplxer camera title) *3

 

Setup file operation

Put a file to SX150

Get a configuration data from the SX150

SX150 Admin Console Configuration

File Open

Account Manager

Communication (Serial) port

• Camera manual cleaning ON/OFF

*1 WJ-SX150 Administrator Console can configure the display pattern.

*2 WJ-SX150 Administrator Console can configure the communication speed (baud rate) of the ports Data 1 to 4.

*3 These menus (or windows) appear only when the Multiplxer is installed in the unit.

• SETUP MENU (OSD)

The basic functions, which are essential for the operation, are configurable. However, some items are not config- urable. The settings about group sequences, operators and schedules, etc.

WJ-SX150 Administrator Console (PC)

All the functions of this unit are configurable. You need a PC to use WJ-SX150 Administrator Console.

Refer to p. 64 WJ-SX150 ADMINISTRATOR CONSOLE for details of the platform and installation.

Notes:

To use WJ-SX150 Administrator Console, you need to prepare a PC and a 9-pin D-sub cable.(Refer to p. 47.)

When changing the configuration of WJ-SX150 Administrator Console, configuration data getting and putting are necessary between the unit and PC to acti- vate your configuration.

Description of Setup Procedures

This chapter describes about configurable items.

Sequence Settings

SETUP MENU can configure tour sequences. WJ-SX150 Administrator Console can configure both of tour sequences and group sequences.

Tour sequence: Up to 16 tour sequences are config- urable (16 steps per tour).

Group sequence: Tour sequences can be activated on up to 4 monitors simultaneously (1 tour sequence per monitor).

Schedule Settings

SETUP MENU can configure daylight saving time. WJ- SX150 Administrator Console can configure timer event, camera cleaning, and daylight saving time.

Timer event: A sequence or spot mode can be activat- ed on the regular time of every month, week or day.

Up to 30 timer events can be registered.

Camera cleaning: Camera cleaning can be executed on the regular time of every month, week or day.

Daylight saving time: Daylight saving times for 20 years are configurable.

Alarm Settings

The operation parameters when an alarm is input to the unit are configurable.

Alarm mode: The operation mode activated along with an alarm input is configurable. Sequence mode or hold mode is selectable. Alarm mode can be set to OFF when not using it.

Alarm event: The event activated along with an alarm input is assignable to each alarm input terminals. The sequence number or spot camera is selectable for the alarm event.

Alarm input (Alarm port): The alarm polarity (N. O. or N. C.) is assignable to each alarm input terminal. One of 16 terminals is assignable for time adjustment.

50

Page 48
Image 48
Panasonic WJ-SX 150 manual Description of Setup Procedures, Sequence Settings, Schedule Settings, Alarm Settings