WJ-HD500 SERIES CONTROL (PS·DATA)
This section will describe what you should take notice when using a PS·Data system controller.
The same descriptions as the system controller's operating instructions are not mentioned here. Refer to them. Refer the descriptions of terminal mode for illustrations.
■Controlling the Recorder with a PS·Data System Controller
●Recorder Mode
Before operating the recorder, it is necessary to enter the recorder mode.
1.Select the desired monitor. (Refer to p. 109 Monitor Selection.)
2.Enter "111" by pressing the numeric button. "111" will appear on the LED display.
3.Press the CAM button.
The recorder image will be displayed on the selected monitor, and you will enter the recorder mode.
4.Enter the desired function code, and then press the FUNCTION button. (Refer to the diagram.)
Function | Code | Note |
Forward field advance | 1 |
|
|
|
|
Backward field advance | 2 |
|
|
|
|
Pause | 4 |
|
|
|
|
Playback | 5 |
|
|
|
|
Recording | 6 | Equal to the REC button of the recorder |
|
|
|
Stop recording and playback | 8 |
|
|
|
|
Stop playback | 9 | Exclusive use to stop playback |
|
|
|
Stop recording | 10 | Exclusive use to stop recording |
|
|
|
Search forward | 11 |
|
|
|
|
Search backward | 12 |
|
|
|
|
Displaying a recorder's OSD | 19 | Pressing again will hide the display. |
|
|
|
5.To select a camera channel, press the numeric button(s), then CAM button. The system will exit from the recorder mode, and the selected camera image will be displayed on the monitor.
Notes:
•Only one operator can enter the recording mode.
•The images from the recorder, which are displayed on the monitor, is conformed to the recorder setting.
