Panasonic WJ-SX 150 manual WJ-HD100 Series Control Terminal Mode, 120

WJ-HD100 SERIES CONTROL (TERMINAL MODE)

Digital Disk Recorder WJ-HD100 Series are operable with the system controller, while connecting to the matrix switch- er.

Note: Before the use, it is necessary to install the multi- plexer board in the matrix switcher, connect the matrix switcher to the digital disk recorder, and con- figure the system through WJ-SX150 Administrator Console, OSD SETUP MENU, and WJ-HD100 Series SETUP MENU. [Refer to p. 34 Installing the Multiplexer Board, p.44 Connection with Digital Disk Recorder WJ-HD100 Series, p. 52 WJ-SX150 SETUP MENU (OSD), p. 64 WJ-SX150 ADMINIS- TRATOR CONSOLE, and Displaying WJ-HD100 Series SETUP MENU in this page.]

The following is the procedure of WJ-HD100 Series SETUP MENU.

The following functions and buttons are valid in SETUP MENU.

Joystick to R (B): Decrements a parameter

Joystick to L (A): Increments a parameter

■Displaying WJ-HD100 Series SETUP MENU

The operations are the same as WJ-HD500 Series.

Refer to p.116 Displaying WJ-HD500 Series SETUP MENU.

■Controlling Digital Disk Recorder WJ- HD100 Series

The following are the operating procedures of WJ-HD100 Series via the system controller.

●Multiscreen Segment Switching

The operating procedure is the same as WJ-HD500 Series. (Refer to p118)

Note: 7-, 10-, or 13-segment multiscreen display is unavailable.

●Manual Recording

The operations are the same as WJ-HD500 Series. Refer to p. xx.

●Normal Playback

Monitor display can be divided into 4, 9, or 16 multiscreen segments to display camera images.

1.Select the desired monitor and camera. (Refer to p. 90 Monitor Selection and p. 91 Camera Selection.)

The monitor number and camera number will appear on the LED display.

2.Press the RECORDER button on the system controller. The system will enter the recorder mode and the RECORDER indicator beside the button will light up.

2.To start the playback, press the PLAY button.

3.To pause the playback, press the PAUSE button.

4.To resume the playback, press the PLAY button.

5.To stop the playback, press the STOP button.

Note: Refer to WJ-HD100 Series Operating Instructions for details and other playback modes.

●Forward or Backward Search

The recorded images can be searched at variable speeds. This function is available during the playback or playback pause. (Refer to Normal Playback in the previous page.)

Move the joystick rightward or leftward to search images.

Joystick to R(B): Search forward

Joystick to L(A): Search backward

The joystick inclination can control the forward/backward search speed.

●Forward or Backward Field Advance

The recorded images can be searched field by field. During the pause, move the joystick rightward or leftward to advance an image field by field.

Joystick to R(B): Forward field advance

Joystick to L(A): Backward field advance

●Search Playback

You can search playback images using the ALARM RECALL table or the SEARCH table.

Every time you press the INDEX button, the display will change as follows.

Live image →	ALARM RECALL table → Date-and-time
entry form →	Live image

The operations are the same as WJ-HD500 Series. Refer to p. 118 Search Playback.

120