The indicator beside the RECORDER button will light up, and the images from the recorder are dis- played on the active monitor in multiscreen seg- ments.

The CAMERA indicator will go out and the monitor number with "-H00" will appear on the LED display.

RECORDER

00: Multiscreen display

01 to 16: Spot display (camera number)

3.To exit from the recorder mode, select the camera. (Refer to p. 91 Camera Selection.) The indicator beside the button will go out. The monitor number and camera number will appear on the LED display again.

You can also exit from the recorder mode by pressing the RECORDER button during the recorder mode.

Note: Only one operator can enter the recorder mode.

Multiscreen Segment Switching

Multiscreen segment patterns are configurable through WJ- HD500 SETUP.

(Refer to the recorder’s operating instructions.)

1.Enter the recorder mode (Refer to p. 116 Recorder.)

2.Press the RECORDER button again. Every time you press the button, the multiscreen segment patterns are switched. (The following is the factory default setting.)

4A (Page 1 of the quad Camera 1, 2, 3, and 4) 4B

(Page 2 - Camera 5, 6, 7 and 8)

4C (Page 3 -

Camera 9, 10,

11 and 12) 4D (Page 4 – Camera 13,

14, 15 and 16)

7 (segments) 9

10 13 16

4A

 

 

3.To return to the spot display, exit from the recorder mode.

Note: Multiscreen segment patterns are not configurable through WJ-SX150 Administrator Console.

117

Normal Playback

1.Enter the recorder mode (Refer to p. 116 Recorder Mode.)

2.To start the playback, press the PLAY button. The sys- tem will enter the playback mode. Then, the most recent recorded image will be played back.

 

 

UP

 

 

 

 

L

 

 

R

 

 

 

DOWN

 

 

 

F2

GROUP SEQ

TOUR SEQ

T&D

CAM ID

EVENT

INDEX

REW/FF

STILL

AUX1 OFF

AUX1 ON

 

PREV

NEXT

MON STATUS

ALL

 

RECORDER

STEP

 

EL-ZOOM

AUX2 OFF

AUX2 ON

STOP

 

PAUSE

ALM H

VLD H

SYS S

STOP

PLAY

PAUSE

SEQUENCE

DEF OFF

DEF ON

 

OSD

 

MON (ESC)

 

CAM (SET)

SETUP

 

SHIFT

MON LOCK

MULTI SCREEN SEL

WIPER

To pause the playback, press the PAUSE button.

To stop the playback, press the STOP button.

To resume the playback, press the PLAY button.

To move forward/backward search during the play- back, move the joystick rightward/leftward, or press REW/FF button.

Joystick to R (B)/FF ( ): Search forward

Joystick to L (A)/REW ( ): Search backward

To move forward/backward field advance during the pause, move the joystick rightward/leftward, or press REW/FF button.

Joystick to R (B)/STEP ( ): Forward field advance

Joystick to L (A)/STEP ( ): Backward field advance

To display the spot picture, press the numeric but- ton corresponding to the desired camera number, then press the CAM (SET) button. Then, the active monitor number with "-H** (** is the camera num- ber)" will appear on the LED display.

To resume the multiscreen display, press the button 0 while holding down the SHIFT button.

To change the number of multiscreen segments, press the button 0 while holding down the SHIFT button again during the multiscreen display.

3.To stop the playback, press the STOP button. The mon- itor display will return to the multiscreen display.

Page 113
Image 113
Panasonic WJ-SX 150 manual 117, Normal Playback