
●Manual Recording
1.Enter the recorder mode (Refer to p. 116 Recorder Mode.)
2.To start recording, press the WIDE and TELE buttons simultaneously.
The digital disk recorder will start recording.
3.To stop the recording, press the STOP button while holding down the SHIFT button.
ZOOM
WIDE |
|
|
| TELE |
|
|
|
|
|
REC
Note: Refer to
●Search Playback
You can search playback images using the Record List or Thumbnail Display. Every time you press the INDEX button, the display will change as follows.
Live image → Record List → Thumbnail Display
You can operate the Record List or Thumbnail Display by referring to the recorder’s operating instructions. In addi- tion, the following operations from the system controllers are also available.
Joystick to UP (D): Moves the cursor up.
Joystick to DOWN (C): Moves the cursor down.
Joystick to L (A): Moves the cursor to the left.
Joystick to R (B): Moves the cursor to the right.
CAM(SET) button: Displays the search editing area./Starts the search after you enter the search condition.
MON(ESC)button: Cancels the search editing area and returns to the Record List or Thumbnail Display.
NEXT button: Increments a parameter.
PREV button: Decrements a parameter.
PLAY button: Starts the playback of a record pointed by the cursor.
Note: The PLAY button is deactivated in the search editing area.
●Electronic Zooming (EL-ZOOM)
Playback images can be electrically zoomed besides a camera's optical zooming.
1.Enter the recorder mode (Refer to p. 116 Recorder Mode.)
2.Press the PLAY button.
3.Press the numeric button corresponding on the desired camera number to display the spot picture.
4.Press the CAM (SET) button.
The selected camera’s picture is displayed in the spot mode.
5.Each time the button 4 and the SHIFT button are pressed, the zooming range are changeable as follows:
2x → 4x → 8x → 1x → 2x
|
| UP |
|
|
|
| L |
| R |
|
|
|
| DOWN |
|
|
|
F2 | GROUP SEQ | TOUR SEQ | T&D | CAM ID | EVENT |
INDEX | REW/FF | STILL | AUX1 OFF | AUX1 ON | |
| PREV | NEXT | MON STATUS | ALL |
|
RECORDER | STEP |
| AUX2 OFF | AUX2 ON | |
STOP |
| PAUSE | ALM H | VLD H | SYS S |
STOP | PLAY | PAUSE | SEQUENCE | DEF OFF | DEF ON |
| OSD |
| MON (ESC) |
| CAM (SET) |
SETUP |
| SHIFT | MON LOCK | MULTI SCREEN SEL | WIPER |
6.To return the zooming range to x 1, press the button 4 while holding down the SHIFT button again.
7.To return to the multiscreen display, press the button 0 while holding down the SHIFT button.
Notes:
•You can move the zoomed area on the monitor with the joystick after Step 4.
•You can also display the still picture after step 4.