Panasonic WJ-SX 150 manual System Status Table, Setup Procedures, Extended Functions

■System Status Table

The current system status can be identified.

The continuous display becomes possible by the OSD set- ting.

		SYSTEM STATUS
MON	CAM	MODE	KB	OPE	PRI
1	01	T01	K1	1	16
2	02	SPOT	K2	2	2
3	04	ALARM	K4	4	1
4	16	CAM	PC	30	1

MON: Monitor's unit address number

CAM: Camera No.

MODE: Operation mode

KB: Controller's unit address number

OPE: Operator number

PRI: Priority

■Setup Procedures

To use the unit, it is necessary to configure the system through the following setup procedures:

•OSD setup with an active monitor and system controller The basic parameters are configurable to operate the unit.

•WJ-SX150 Administrator Console with the PC

The setup utility can configure all the functions of the

unit.

Refer to p. 52 WJ-SX150 SETUP MENU (OSD) and p. 64 WJ-SX150 ADMINISTRATOR CONSOLE for details.

■Extended Functions

If a recorder is connected to the matrix switcher, the follow- ing will be available.

●Recorder Connection

The time-lapse recording and playback of all the camera images connected to the unit are possible.

Each camera's image and camera ID are recorded.

You can search and play back the desired camera's image by the camera ID.

The time-lapse recording is conducted as following.

Start

Camera1	Camera 2		Camera 3	Camera 4	Camera 5
t		t

The operations are conducted with the buttons on the recorder, system controller or PC.

•The setup of the recording device

•The start of the playback

•The stop of the playback

•The playback of the recorded images (the multiscreen display, still spot picture or still multiscreen picture, etc.)

•The search for the recorded image (the search by the camera ID, or the recorded time and date)

•Forward or backward search

•Forward of backward field advance

•Fast-forward

•Rewind

•Index

Refer to each device's operating instructions for details.

19