MONITOR DISPLAY CONTROL

The procedure described below lets you determine on-screen display (OSD) items, such as camera title, clock and status, on and off on the active monitor screen.

Before controlling each item, monitor selection is necessary. (Refer to p. 109 Monitor Selection.)

1.Press the SHIFT button, and then press the numeric buttons corresponding to the function code. (Refer to the table.)

2.Press the FUNCTION button. The function will be executed.

Function

Code

Controller Status

Note

Displaying the clock

104

 

Pressing again will hide the display.

 

 

 

 

Displaying the camera title

105

 

Pressing again will hide the display.

 

 

 

 

Displaying the event

106

 

Pressing again will hide the display.

 

 

 

 

Displaying the monitor status

107

 

Pressing again will hide the display.

 

 

 

 

Displaying all the items

19

 

Pressing again will hide the display.

 

 

 

 

Displaying System Status

102

"OSD" appears on the LED.

Pressing again will return to the normal display.

 

 

 

 

Displaying Video Loss History

103

"OSD" appears on the LED.

Pressing again will return to the normal display.

 

 

 

 

Notes:

Alarm History Table doesn't have a function code. When displaying the table, press the ALM RECALL button instead of the steps 1 and 2 above. "OSD" will appear on the LED display, and the ALARM HISTORY table will appear on the active monitor.

You cannot control OSD display position.

111

Page 108
Image 108
Panasonic WJ-SX 150 manual Monitor Display Control, 111