Moxa Technologies CP-134U user manual General Troubleshooting, Hardware causes and solutions

6

Troubleshooting

Common Industio CP-134U Series problems and possible solutions are listed below. If you still have problems, contact your dealer or Moxa for help, or use the Problem Report Form at the end of this manual to report problems to your dealer.

General Troubleshooting

1.The MOXA PCI board cannot be detected by the MOXA driver while installing the driver.

Hardware causes and solutions:

a.The board is not installed in the computer. Please install it.

b.The board is not properly plugged into the system. If this is the case, re-plug the board in a 32-bit PCI. It is also possible that a slot has malfunctioned. In this case, try other slots until you find one that works.

c.The motherboard does not have an available IRQ for the CP-134U Series board. In this case, enter the BIOS and make sure there is an availalbe IRQ under PCI/PnP settings.