Moxa Technologies user manual A-2 Industio CP-134U Series User’s Manual

Power requirement	CP-134U	420 mA max. (+5V)
	CP-134UI	700 mA max. (+5V)
	CP-134IS	710 mA max. (+5V)
Dimensions	CP-134U	120	× 80 mm	(W × D)
	CP-134UI	120	× 110 mm	(W × D)
	CP-134S	120	× 80 mm	(W × D)
	CP-134IS	120	× 110 mm	(W × D)
Operating Systems	Windows 95/98/NT/2000/XP, Linux

PCI

The 32-bit Industio CP-134U Series board complies with PCI Specifications 2.1. The IRQ and I/O address hardware configuration is automatically assigned by the PCI BIOS. This means that you must first plug in the board before installing the driver software.

As opposed to ISA slots, different PCI slots in the same PC may have different bus numbers and device numbers with respect to the PCI specifications. The same PCI board will have different system configurations if switched to a different PCI slot; this is called slot-sensitiveor slot-dependent. This may also apply to PCI slots in a PC with a different motherboard, which may use different device number sets. For example, some use 17, 18, 19, and 20 for identifying the respective PCI slots, but some use 11, 12, 13 and 14.

Due to slot-dependency, it is necessary to re-configure the driver software once the board is plugged into different PCI slots.

Up to 4 Industio CP-134U Series boards are allowed in one system. When installing more than one board, please remember the order the boards are installed to distinguish the installed boards from each other.

A-2 Industio CP-134U Series User’s Manual