Moxa Technologies CP-134U user manual Software Installation Board and Port Ready Stage

Software Installation

Board and Port Ready Stage

The Board and Port Ready Stages for Windows 95 and Windows 98 are slightly different. This last stage completes the driver installation.

Windows 95

After configuring the ports, restart Windows 95 before using the Industio CP-134U Series board’s COM ports.

Windows 98

After configuring the ports, click the [Finish] button. You can start using the Industio CP-134U Series board’s COM ports after restarting Windows 98.

Note! If an error message similar to “CP-134U Series(BusNo=x, DevNo=x, Port1=COMx) interrupt number is invalid!” pops up, refer to the “Troubleshooting” chapter for solutions.

If you want to add more boards after the driver has been installed, simply plug in the Industio CP-134U Series board and Windows 95/98 will automatically detect the new board, and then skip to the Port Configuration stage to take care of port settings.

At this point, the driver installation of the Industio CP-134U Series is complete (including board and port configuration). However, if you need to make changes to the board or port configuration, refer to the next section, “Configuring the Board and Ports,” for more configuration details.

Once the board and the driver are installed and the driver restarts successfully, you can start to develop applications with the PComm library (see “Serial Programming Tools”) or the Microsoft Win32 API. You can also execute any ready-made applications, such as PComm utility Terminal emulator (see “Serial Programming Tools”) or HyperTerminal to transmit/receive data, as well as Remote Access Service to provide dial-up networking capabilities.

Industio CP-134U Series User’s Manual 3-17