Moxa Technologies CP-134U user manual Updating the Driver, Software Installation

Software Installation

You may use this configuration panel to:

Click on [Property] to enter the “Property” dialog box to configure the selected board with the correct “COM Number,” “Rx FIFO Trigger,” and “Tx FIFO Size.” See Steps 8 and 9 in the previous section, “Installing the Driver,” for more details.

Click on [Add] to add one more board that has not yet been configured for the system. See Steps 6 to 9 in the previous section, “Installing the Driver,” for more details.

To automatically remove the configuration, simply unplug the CP-134U Series board—after you turn off your PC. There is no need to use the remove board function from the Moxa Smartio/Industio Configuration Panel dialog box.

Click [OK] to confirm the configuration changes that you’ve made.

Click on [Cancel] to close the window without changing the configuration.

Updating the Driver

To update the driver for the Industio CP-134U Series board, simply remove the driver, as described in the next section, and reinstall it as detailed in the section, “Installing the Driver.”

Industio CP-134U Series User’s Manual 3-9