Moxa Technologies CP-134U user manual System Requirements, Hardware Installation

msdiag	Diagnostic program for displaying installed Moxa Smartio/Industio boards.
msmon	Monitoring program to observe data count and line status signals.
msterm	A simple terminal program which is useful when testing serial ports.
io-irq.exe	Configuration program for setting up ISA boards. Please note that this program
	can only be executed under DOS.

The source code for all of these drivers and utilities are published under GNU General Public License. Please refer to the GNU General Public License announcement in each source code file for more detail.

You may always find the latest Moxa drivers at www.moxa.com or www.moxa.com.tw.

This version of the driver can be installed as a Loadable Module (Module driver) or built into the 1kernel (Static driver). You may refer to the following installation procedure to determine which method is suitable for you. Before you install the driver, please refer to the hardware installation procedure in the User's Manual.

We assume the user is familiar with the following documents.

Serial-HOWTO

Kernel-HOWTO

System Requirements

Hardware platform: Intel x86 machine

Kernel version: 2.0.3x or 2.2.x or 2.4.x gcc version 2.72 or later

A maximum of 4 boards can be installed in combination

Installation

Hardware Installation

The Smartio/Industio family multiport boards come in two different bus types: ISA and PCI.

PCI board

You may need to adjust IRQ usage in the BIOS to avoid an IRQ conflict with other ISA devices. Please refer to the hardware installation procedure in the User's Manual before

3-38 Industio CP-134U Series User’s Manual