TROUBLESHOOTING
Problem |
| Possible Solution | |
| 1. | Check for amount of fuel. | |
| 2. | Make sure Choke Lever is in proper position. | |
| 3. | Make sure Spark Plug Wire is not loose. | |
| 4. | Check condition of Spark Plug. Wipe off any access fuel | |
|
| with a clean, dry cloth. Prior to reinstalling the spark | |
|
| plug, vent the combustion chamber by pulling the start | |
|
| grip several times. | |
Engine will not start or runs | 5. Make sure Air Filter assembly is clean | ||
poorly. | 6. | Make sure to press Decompression Valve before | |
| |||
|
| starting. Clean/replace valve if it pops up without being | |
|
| pulled when unit is off. | |
| 7. | Have a qualified service technician check the ignition | |
|
| system. | |
| 8. | Have a qualified technician check/adjust the carburetor. | |
|
| The carburetor is not set to run satisfactorily at | |
|
| altitudes above 5,000 ft. | |
Engine smokes excessively | 1. Check for proper mix of fuel. | ||
when running. | 2. Check Air Filter condition. | ||
| 1. | Check for proper mix and amount of fuel. | |
Saw Blade not rotating up | 2. Check condition of Spark Plug. | ||
to full speed. | 3. Adjust tension on | ||
| 4. | Check Air Filter. | |
Poor quality of cut. | 1. | Make sure Blade is undamaged. | |
2. | Make sure Saw Blade is properly installed. | ||
| |||
Kill Switch does not turn off | Immediately discontinue use of Cut Off Saw. Have a | ||
Engine. | qualified service technician check the Kill Switch. | ||
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER AS- SUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGI- NAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
REV 07e
SKU 94488 | For technical questions, please call | PAGE 17 |
