service, contact the HFT Customer Service Department at
3. Consequential Damages Coverage
Coverage under this warranty shall also extend to the failure of any engine components caused by the failure of any warranted
part while it is still covered under this warranty.
4. Coverage Exclusions
Warranty claims shall be filed in accordance with the provi- sions of the HFT warranty policy explained in the box at the top of the previous page. HFT shall not be liable for any loss of use of the engine, for any alternative usage, for any damage to goods, loss of time, or inconvenience. Warranty coverage shall also be excluded for any part which fails, malfunctions, or is damaged due to failure to follow the maintenance and operating instructions set forth in the Owner’s Manual includ- ing, but not limited to:
(a)use of parts which are not authorized by HFT
(b)improper installation, adjustment or repair of the engine or of any warranted part unless performed by an autho- rized warranty center
(c)failure to follow recommendations on fuel use contained in the Owner’s Manual
(d)improper or inadequate maintenance of any warranted parts
(e)repairs performed outside of the authorized warranty service dealers
(f)alterations by changing, adding to or removing parts from the engine.
5. Service and Maintenance
Component parts which are not scheduled for replacement as required maintenance or are scheduled only for regular inspection to the effect of “repair or replace as necessary” are warranted for the warranty period. Any warranted part which is scheduled for replacement as required maintenance is warranted for the period of time up to the first scheduled replacement point for that part. Any replacement part, pro- vided it is equivalent in durability and performance, may be used in performance of maintenance or repairs. The owner is responsible for commissioning a qualified technician/me- chanic to perform all required maintenance, as outlined in the Inspection, Cleaning, and Maintenance section on page
14 of this manual.
6.Warranted Parts
1)Fuel Metering System
i)Carburetor and its internal parts.
ii)Fuel pump (if so equipped).
iii)Cold start enrichment system.
2)Air Induction System
i)Intake pipe/manifold.
ii)Air cleaner.
3)Ignition System
i)Spark plug.
ii)Magneto ignition system.
4)Catalyst System (if so equipped)
i)Exhaust pipe stud.
ii)Muffler.
iii)Catalytic converter (if so equipped).
5)Miscellaneous items Used in Above Systems
i)Vacuum, temperature and time sensitive valves and switches.
ii)Hoses, belts, connectors, and assemblies.
SKU 94488 | For technical questions, please call | PAGE 27 |
