area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
2.WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker.
3.WARNING! The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be under stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
Caution! Your Warranty is voided if:
You do not operate the Cut Off Saw with the proper 50:1 fuel mix in its Fuel Tank. Never run the Engine with an improper fuel mix, low or no fuel mix. Running the Engine with an improper fuel mix, low or no fuel mix will permanently damage the unit.
SEE PAGES 12 AND 13 OF THIS MANUAL FOR FUEL MIX INSTRUCTIONS.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on pages 19 through 26 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
PRODUCT FEATURES
(See Figure A, page 11, for details.)
1.Saw Blade (23F): Use only composite abrasive or diamond abrasive Blades (not included). Depending on the material to be cut, these Blades are made of differ- ent materials. Make sure to choose the right Blade for the material being cut. The Saw Blade should be 14” in diameter. From 7/64” to 1/4” thickness, and with a 1” diameter spindle mounting hole. The Saw Blade should be rated at a minimum of 4,700 RPM.
2.Flanges (22F): Clamp and support the composite or diamond Saw Blade (23F).
3.Hex Bolt (25F): Tightens the Flange (22F).
4.Blade Guard (19F): Safety guard. Directs sparks and dust away from the opera- tor.
SKU 94488 | For technical questions, please call | PAGE |
