| PRODUCT SPECIFICATIONS |
|
|
Required Saw Blade Type | 14” Diameter (Not Included) |
| 7/64” to 1/4” Thickness |
| Composite Abrasive or Diamond Abrasive |
| Rated at a Minimum 4700 RPM |
| 1” Diameter Spindle Hole |
Maximum Saw Blade Speed | 4700 RPM |
Saw Blade Rotation | Clockwise |
Maximum Cutting Depth | |
Drive Type | Belt Driven |
Belt Type | 10X840 Li (3/4” Width) |
Spindle Diameter | 1” Diameter |
Noise Level | 110 dBA @ 3 Feet |
Engine Specifications | 3.8 HP / Recoil Start / Air Cooled |
| Engine Idle Speed: 2400 RPM |
| 64cc Displacement / 49mm Cylinder Bore / Single Cylinder / 34mm Piston Stroke |
| Fuel Mix: Unleaded Gasoline with Octane Rating of 91 / Two Stroke Engine Oil / Ratio 50:1 |
| Fuel Tank Capacity: 0.4 Gallons |
| Ignition Type: Electronically Controlled Magneto |
| Spark Plug Type: Bosch WSR 6F or NGK BPMR 7A; M14 x 1.25 Thread |
| Engine Approvals: 2003 U.S. EPA |
| Emission Control: EM / TWC |
Overall Dimensions | |
Product Weight | 29.5 Pounds |
The Emission Control System for this Cut Off Saw is warranted for standards set by the U.S.
Environmental Protection Agency. For warranty information, refer to the back two pages of this manual.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES AND PRECAUTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the pres- ence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
SKU 94488 | For technical questions, please call | PAGE |
