3.Once the proper fuel mix is obtained, remove the Fuel Tank Cap (16C). Fill the Fuel Tank (2C, 10C) approximately 3/4 full with the fuel mix (the Fuel Tank capacity is 0.4 gallons). Then, replace the Fuel Tank Cap. (See Figure A.)

FUEL MIX QUANTITIES

Ratio

Two Cycle Oil

Unleaded Gasoline (91 Octane)

50:1

4 Fl. Oz.

1.5 Gal.

50:1

8 Fl. Oz.

3 Gal.

50:1

16 Fl. Oz.

6 Gal.

Table A

OPERATING INSTRUCTIONS

Note: Please read and familiarize yourself with the How To Stop The Cut Off Saw instructions on page 13 before operating.

To Start The Cut Off Saw:

1.WARNING! Wear ANSI-approved safety impact goggles, hearing protection, and NIOSH-approved dust mask/respirator during use.

2.Place the Cut Off Saw on flat, level ground, so that the Saw Blade (23F) does not contact any objects or the ground. Orient the saw away from your body.

3G

5D 9D

7B

3A

FIGURE B

10D

5C

1D

3.Pull the Throttle Trigger (10D) all the way back, press down on the Full Throttle Lock Button (9D) and Release the Throttle Trigger (10D). (See Figure B.)

REV 07e

SKU 94488

For technical questions, please call 1-800-444-3353

PAGE 12

Page 12
Image 12
Chicago Electric 94488 operating instructions Operating Instructions, Table a