HP 1010 Fax, 1010xi Fax 45

hp fax 1010 series

5Carefully wipe the scanning glass with a soft, dry cloth.

•If the glass is very dirty, first wipe it with a slightly dampened cloth, then with a dry one.

•Be careful not to scratch the glass surface.

6Replace the roller in reverse order, and then close the front panel firmly until it clicks into place.

adjust the scanner

The scanner is adjusted at the factory. If, however, you drop your machine while moving it, we recommend you adjust scanner.

1Press Menu repeatedly until MAINTENANCE appears and press Start/Enter.

2Scroll to Adjust Scanner by pressing and press Start/Enter.

3Load a plain WHITE sheet of paper (no writing or graphics) into the document feeder and press Start/Enter.

•The machine starts to scan the document to adjust the scanner.

•Printing quality may be unexpectedly worse if you do not use a plain WHITE paper for the adjustment.

LCD error messages

These are the error message that may display along with solutions.

DisplayStatus/Solution

Adjust scannerAdjustfirstthe scanner to fix this problem as described in adjust the in Maintenancescanner menu on page 39.

Check white paperYou must use plain, white paper when adjusting the scanner. See document and try adjust the scanner on page 39.

again

Duplicated withThe same number has already been registered into another speed dial [Speed No.xx]code.

adjust the scanner	39