CAP MENU (TURNTABLE ANTENNA SETTINGS)

LNB TILT/SKEW

Using the buttons or the numeric keys, enter the required tilt angle (skew) for the LNB and press

the button to confirm. Check your settings by referring to the “Signal-Strength” and “Signal-Quality” bars on the right-hand side. The higher the bar, the stronger and better quality the signal received.

STOP ON SIGNAL

Use the  buttons to select whether the CAP should stop automatically (Yes or No) on detection of a satellite signal during manual alignment by the user.

MOVE TO THE AZIMUTH (ROTATE THE ANTENNA)

As soon as you switch the orange bar to the “Move to the azimuth (rotate the antenna)” line you will see the following display:

You now have the following options for rotating your CAP:

-“Step by step” using the buttons

-“Move towards min” (minimum rotary position) with the button or

-“Move towards max” (maximum rotary position) with the button

Note: If you previously set “Stop on signal” to “Yes”, the antenna will stop as soon as it detects a satellite signal.

46

Page 46
Image 46
Kathrein cap910 manual Lnb Tilt/Skew, Stop on Signal, Move to the Azimuth Rotate the Antenna