FIRST INSTALLATION
Show 4:3 event
Here you can select the type of screen display mode for 4:3 broadcasts on a 16:9 TV set:
-normal (pillarbox)
-Stretched (Full Screen) or
-zoom in (Pan & Scan)
Audio format via HDMI
Here you can select the type of audio signal that is transmitted by the HDMI interface. Select the signal that your TV set can process:
-Decoded PCM or
-S/PDIF format
TV standby via HDMI
If you select “Off”, the TV set must be switched on or off separately. If you select “On”, the TV set will be switched on automatically as the receiver starts up (but only if the TV set was in
Automatically switching the TV set on/off by the receiver is available only if the TV set supports this function!
Press the (green) button to move to the next menu.
The following display appears:
Picture format
Select the type of screen display, depending on your setting for the TV format:
-TV aspect ratio “4:3”: Pan & Scan or Letterbox
-TV aspect ratio “16:9”: Always 16:9 or automatic
Television System
Here you can select the TV standard you wish to use.
-PAL or
-NTSC or
-MULTI
System
Use the buttons here at “System” to select “CAP”. Then use the buttons to select the “Initialize CAP” line and press the button to confirm.
42
