Kathrein cap910 manual Dismantling for Servicing, Address of the Service Centre, Esc

DISMANTLING FOR SERVICING

If repairs to the system or individual components are necessary, contact your specialist dealer or our service centre (see below for address).

Never open the turntable yourself!

DISMANTLING

•Do not cut the cables! Disconnect the cables at the cable disconnection box provided for the purpose!

•The cables laid within the vehicle can remain there

•Unscrew the six M6 screws securing the turntable to the mounting plate

•Lift the turntable at an angle and insert a suitable piece of wood underneath it

•Disconnect the cables at the cable disconnection box provided for the purpose (remove the plugs)

•Then place the turntable on the prepared wooden supports

•To ship the turntable, use the original packaging which you have saved

•Seal the opening in the vehicle roof appropriately to protect against the ingress of moisture

•If a HDZ 100 roof gland has been fitted and the equipment is then removed, the cable glands no longer used should be sealed with the integral plugs. The enclosure is then watertight once again.

Note: Before exchanging the UFS 940sw, first move the turntable to the park position.

ADDRESS OF THE SERVICE CENTRE

	Factory repair centre		Regional repair centre
ESC		KATHREIN Sachsen GmbH
Electronic Service Chiemgau GmbH		Lindenstraße 3
Bahnhofstraße 108		09241 Mühlau GERMANY
83224 Grassau GERMANY		Tel:	+49 3722 6073-31
Tel:	+49 8641 9545-0	Fax:	+49 3722 6073-18
Fax:	+49 8641 9545-35 and -36	e-mail:	service@kathrein-sachsen.de
Internet:	http://www.esc-kathrein.de
e-mail:	service@esc-kathrein.de

27