Cooper Lighting Recessed Multi-Lamp Fixture specifications Housing, System Protection, Electrical

DESCRIPTION

An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable for downlighting and accent applications. Utilizes FOUR (4) PAR30 Metal Halide lamps.

For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

Type

Date

A.... Housing

Housing, junction box & trim assembly are all steel construction. Fixture utilizes a removable trim sleeve to provide a 0.75” flange around the ceiling opening and to help conceal the inner hardware of the fixture from sight below the ceiling. Can accommodate 0.50” to 1.25” ceiling thickness. Optional Chicago Plenum configuration available.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through branch wiring, 6 #12 90º C supply con- ductors or 60º C for end of run. The fixture

is also UL listed as ‘access above ceiling not required’.

D... Electrical

Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic metal halide ballasts on individually removable “trays” for easy maintenance. May also be con- figured for remote power.

E.... Lamps

Four (4) PAR30 Metal Halide lamps mount- ed in adjustable double gimbals. Lamp holders are individually removable and may be regressed 1” for additional cut-off. Lamp can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º locking lamp adjustment. Beveled-edge

lamp ring is secured with threadless, bayonet action. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. base sockets.

F.... Mounting

Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 6.49” x 23.56”

COMBOLIGHT®

Next Generation

Recessed

Multi-Lamp Fixture

Four (4) Light PAR30 Metal Halide

New Construction Housing w/ 0.75” Trim Flange

15.01”

7.19”

Double

Gimbal

45º x 45º

Adjust

For use with 39W or 70W PAR30MH lamps.

33.21”

7.45”

24.26”

29.08”

22.76”

5.69”

5.69”

Integral Electronic

Metal Halide Ballasts

Thermal

Protector

ORDERING INFORMATION

C4

E

T

Configuration	Lamp Type / Wattage Label
C4 = COMBOLIGHT	039M30 =	39 Watt PAR30 Metal Halide
Recessed Four (4) Light	070M30 =	70 Watt PAR30 Metal Halide

Housing

N = New Construction

C = Chicago Plenum

Power Supply

Voltage

1 = 120V

2 = 277V

Power Supply

E = Electronic Metal Halide Ballast

Lamp Mechanism

G = Double Gimbal

R = Retractable Double Gimbal

Trim Flange

T = 0.75” Trim Flange

Trim Finish

W = White

B = Black

S = Industrial Silver

Housing Interior/Electrical Door/Sleeve Finish

W = White

B = Black

S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 042408

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031