Extron electronic MPX Plus 866 A manual WCP Audio-input Configuration menu bar selection

Hardware Status — Provides an overall view of the status of the matrix switcher, including the primary and secondary power supply status and the individual voltages, the fan and temperature status, the Remote RS-232 port configuration, and the installed and updated firmware status (figure 5-33).

Figure 5-33 — Status window

Name Presets — Allows you to assign a name to each of the 32 memory presets.

NPreset names are limited to 12 upper- and lower-case alphanumeric characters, space, and the _ : = and / characters.

NThe following characters are invalid in preset names: + ~ , @ = ‘ [ ] { } < > ’ “ ; : \ and ?.

Show RS-232 Strings — Displays the ASCII commands that are used by the current configuration. You can refer to these for RS-232 programming.

Initialize — Initializes and clears any or all of the following: ties, presets, audio configuration, preset names, icon names, and icons.

WCP Audio-input Configuration menu bar selection

Displays the audio gain level setting for a single input or for all inputs

and allows you to change it. The level is expressed as the magnitude (number of decibels) and polarity (positive, gain or negative, attenuation) of the audio adjustment.

WCP Preferences menu

Immediate Changes — Causes configuration changes to take effect immediately.

Hold/Verify Changes — Delays implementation of configuration changes until the Changes – Take button is pressed.

Ties as Lines — Displays ties as lines (figure 5-34).

Figure 5-34 — Ties shown as lines

PRELIMINARY

MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software 5-55