Extron electronic MPX Plus 866 A manual Deleting a group master, Delete a group as follows

PRELIMINARY

Switcher Software, cont’d

Deleting a group master

Delete a group as follows:

1. Click Tools > Configure Groups to open the Configure Groups dialog box.

NOr, click View > Group Controls and then click the Add a Group menu selection.

2.	In the Select Group drop-down box, click a numbered group (such as
	“Group #1“) to select it (figure 5-11).
3.	Click Delete Current Group.
4.	Click Yes in the Confirm Deletion dialog box.

Viewing and using a group master

Click View > Group Controls to open the Group Controls dialog box (figure 5-12).

Figure 5-12 — Group Controls dialog box

•Slide a group fader up and down to adjust all gain controls in the group.

•Click and drag a soft limit () to set the ceiling or floor for the group.

NThe soft limits cannot be dragged beyond the current setting of the group fader; the ceiling cannot be set below the fader and the floor cannot be set above the fader.

NNone of the individual gain faders can be dragged below the floor or above the ceiling of the group’s soft limits.

•Click and drag a soft limit () to set the ceiling or floor for the group.

•Click the Mute button in a mute group to mute or unmute all blocks in the group.

NIf a block is muted, that block remains muted when the group mute is released.

•Click Add a Group to open the Configure Groups dialog box. See

“Configuring a group master“ and figure 5-11.

•Click Tools > Clear All Groups to delete all groups.

5-18 MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software