Extron electronic MPX Plus 866 A manual Set this option to None

PRELIMINARY

Switcher Software, cont’d

Ties as Crosspoints — Displays ties as a matrix of inputs and outputs (figure 5-35). Ties that have been made are indicated as amber (video and audio), green (video only), and red (audio only) boxes. Ties that will take effect when you click on the Take button are indicated by +. Ties that will be broken when you click on the Take button are indicated by –.

Figure 5-35 — Ties shown as crosspoints

Frequency read options (computer video inputs only) — Allows you to set the input signal detection (DSVP) feature as follows:

•To never sample and display the sync or no sync status

(set this option to None)

•To automatically refresh the display

(set this option to Automatically every 10 seconds)

•To sample the sync and update the display whenever you make a configuration change (set this option to On demand or by refresh).

Icons in I/O Boxes — Erases any numbers in the I/O boxes in the

Control Program window (figure 5-25). You can place icons in the

boxes.

Numbers in I/O Boxes — Erases any icons in the I/O boxes in the Control Program window and fills each box with the associated input or output number.

Catch FPC/other’s Changes — When checked, sets the switcher to report all configuration and setting changes to the Remote RS-232 or Ethernet connection that turned this selection on. These reports allow the Matrix Switchers Control Program to track the changes that occur in the switcher’s configuration and settings, whether commanded via the front panel, the RS-232 port, or the Ethernet port.

5-56 MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software