Extron electronic MPX Plus 866 A manual 10 11 12 13 14 7 8 9 10 11

3. Select a configurable input: Press the Video Input button for one of inputs 11 through 14.

Press and release the Video Input 13 button.

The button lights.

VIDEO INPUTS

9 101112 13 14 7 8 9 10 11 12

VIDEO OUTPUTS

Either the Video Output 7 button or the Output 8 button lights green to indicate the video format as follows: 7 — Composite 8 — S-video

NThe input video format is protected when front panel Lock mode 2 is selected. You can view the selected formats in Lock mode 2 but you cannot change them from the front panel. See “Setting the front panel Locks (Executive modes)” on page 3-44.

If front panel Lock mode 2 is selected and you try to perform step 4, the action is ignored.

4. Change the format: Press and release the unlit Video Output button, 7 or 8, that relates to the desired format.

Press and release the Video Output button to change the video format as follows:

7 — Composite 8 — S-video

In this example, the input is set to S-video.

7 8 9 10 11 12

VIDEO OUTPUTS

NIf desired, select another of configurable video inputs 11 through 14 to view or change the video format for that input.

5. Deselect Video mode: Press and release the Video button.

Press the Video button to exit Video mode.

		I / O
The Video button stops				The Audio button lights red.
	VIDEO		AUDIO
blinking and lights green.

All input buttons and output buttons return to unlit or background illumination.

NFor the switcher to recognize the change and create a new configuration map, you must create a new tie for the input whose format was changed.

PRELIMINARY

MPX Plus 866 A Media Presentation Matrix Switcher • Operation 3-27