Establishing a connection

Establish a network connection to an MPX switcher as follows:

1. Open a TCP socket to port 23 using the switcher’s IP address.

NIf the local system administrators have not changed the value, the factory- specified default, 192.168.254.254, is the correct value for this field.

The switcher responds with a copyright message including the date, the name of the product, firmware version, part number, and the current date/time.

NIf the switcher is not password-protected, the device is ready to accept SIS commands immediately after it sends the copyright message.

NIf the switcher is password-protected, a password prompt appears below the copyright message.

2. If the switcher is password protected, enter the appropriate administrator or user password.

If the password is accepted, the switcher responds with Login User or Login Administrator.

If the password is not accepted, the Password prompt reappears.

Connection timeouts

The Ethernet link times out after a designated period of time of no communications. By default, this timeout value is set to 5 minutes but the value can be changed. See the Configure port timeout commands on page 4-20.

NExtron recommends leaving the default timeout at 5 minutes and periodically issuing the Query (Q) command to keep the connection active. If there are long idle periods, Extron recommends disconnecting the socket and reopening the connection when another command must be sent.

Number of connections

An MPX switcher can have up to 200 simultaneous TCP connections, including all HTTP sockets and Telnet connections. When the connection limit is reached, the switcher accepts no new connections until some have been closed. No error message or indication is given that the connection limit has been reached. To maximize performance of an IP-enabled device, the number of connections should stay low and unnecessary open sockets should be closed.

Verbose mode

Telnet connections to an MPX switcher can be used to monitor for changes that occur on the switcher, such as front panel operations and SIS commands from other Telnet sockets or a serial port. For a Telnet session to receive change notices from the switcher, the Telnet session must be in verbose mode 1 or 3. See the “Set verbose mode” command on page 4-20. In verbose mode 1 or 3, the Telnet socket reports changes by sending messages that resemble SIS command responses.

PRELIMINARY

MPX Plus 866 A Media Presentation Matrix Switcher • SIS Programming and Control

4-5

Page 88 Page 90
Page 89
Image 89
Extron electronic MPX Plus 866 A manual Establishing a connection, Connection timeouts, Number of connections, Verbose mode
Page 88 Page 90

MPX Plus 866 A specifications

The Extron MPX Plus 866 A is a powerful multimedia presentation switcher designed to meet the needs of modern AV environments. This advanced device simplifies the management of multiple audio and video sources, providing seamless control and connectivity in various settings such as conference rooms, classrooms, and auditoriums.

One of the key features of the MPX Plus 866 A is its ability to handle a wide range of video formats. It supports both HDMI and analog video, allowing for compatibility with different devices. This versatility ensures users can connect laptops, projectors, and other AV equipment without any issues, making it ideal for mixed-use environments where various technologies coexist.

With an 8x8 matrix design, the MPX Plus 866 A can route up to eight different input sources to eight output destinations. This feature enables users to select and switch between sources quickly and efficiently, enhancing the overall presentation experience. Additionally, the device incorporates Extron's high-performance scaling technology, which ensures that video signals are processed with exceptional clarity and detail, regardless of resolution.

Another noteworthy characteristic of the MPX Plus 866 A is its built-in audio capabilities. The switcher includes a comprehensive audio mixer with support for both analog and digital audio signals. This allows users to integrate and control audio sources effectively, ensuring that sound quality matches the visual experience. Furthermore, it features advanced audio processing tools, including equalization and filtering functions, to enhance audio output in any environment.

The MPX Plus 866 A also emphasizes ease of use and accessibility. Its user-friendly interface, combined with an intuitive control system, allows operators to navigate the device with minimal training. Additionally, the switcher supports various control options, including RS-232 and Ethernet, enabling integration into larger AV control systems for centralized management.

In summary, the Extron MPX Plus 866 A stands out as a versatile and reliable multimedia presentation switcher. Its extensive range of input and output options, advanced scaling and audio processing technologies, and emphasis on user-friendly design make it an exceptional choice for any professional AV installation. Whether in an educational setting or corporate environment, the MPX Plus 866 A ensures seamless connectivity and high-quality performance, meeting the demands of today’s multimedia presentations.
Top Page Image Contents