Extron electronic MPX Plus 866 A manual Symbol definitions, X6! =

Symbol definitions

] = CR/LF (carriage return/line feed) (hex 0D 0A)

}= Carriage return (no line feed, hex 0D)

• = Space character

= Pipe (vertical bar) character

*= Asterisk character (which is a command character, not a variable) E = Escape key (hex 1B) (use W instead of Esc for Web browsers)

X6)	=	Gain control or mic mix-point	See the tables on page B-4and B-5.
X6! =		Level value; pre-matrix (A), post-matrix (C), and mic-mix (D)	See the table on page B-6 through B-8.
			-35 dB to + 25 dB, in 0.1 dB increments.
			N Pre-matrix and post-matrix, -12 dB to +12 dB only.
X6@ =		Mic/line gain level value	See the table on page B-8.
			0 dB to +80 dB, in 1.0 dB increments.
X6# =		Mute status	0 = unmute
			1 = mute
X6$ =		Group master group number	01 – 32 (repeated as X2) in chapter 4,”SIS Programming
			and Control”)
X6% =		Group fader setting	dB value, in 0.1 dB increments. The valid range depends
			on the type of gain block that is assigned to the group
			number (X6$) specified in the command:
			A = -120 to +120 (-12.dB to +12.0 dB)
			B = 000 to 800 (0.00 dB to 80.0 dB)
			C = -1,000 to +120 (-100.0 dB to +12.0 dB)
			D = -350 to + 250 (-35.0 dB to + 25.0 dB)
			E = -180 to +240 (-18.0 dB to +24.0 dB)
X6^ =			F = -640 to 000 (-64.0 dB to 0.00 dB)
		Group fader offset	dB value, in 0.1 dB increments, to raise or lower a group
			fader
X6& =		Group fader soft limit	dB value, in 0.1 dB increments. The valid range must be
			within the range for the gain block grouped in X6%.
X6* =		Group type	6= gain (A through D)	12 = mute
X6( =			18 = gain (E and F)
		Personal Identification Number (PIN)	Four numeric digits, default = 0000
X7) =		Protected configuration status	0 = no protected configuration saved
			1 = protected configuration saved

PRELIMINARY

MPX Plus 866 A Media Presentation Matrix Switcher • DSP SIS Commands B-3