Extron electronic MPX Plus 866 A manual DSP Configurator-unique navigation Making ties

PRELIMINARY

Switcher Software, cont’d

DSP Configurator-unique navigation

Making ties

Video and audio ties can be made from the keyboard as follows:

1.	Arrow (	, , , and ) and/or Tab ( Tab ) to the A/V matrix block (B) input
	node ( ) from which you will make the tie. The node is marked by a green
	outline (	).
2.	Press and hold the Shift Shiftkey while you press the right arrow to drag
	the potential tie (dashed line) to the corresponding output node (input 1 to
	output 1, 2 to 2, and so on).

NIf input number 7 or 8 is selected in step 1, when you perform step 2, the potential tie is to output 6.

3.	Release the Shift Shift	key.
4.	Press the Enter Enter	key to execute the tie.

5. If desired to make additional ties from the same input, press the

up arrow or down arrow (Shift Shift is not required) to select another output to tie to the same input.

6. If you made additional ties from the same input, press the Enter Enter key to execute the tie.

7. If desired, repeat steps 5 and 6 to tie additional outputs to the same input.

8. If desired to make ties from a different input, press the left arrow key once, and repeat steps 1 through 7.

9.	Press the Tab Tab key, Esc Esc key, right arrow key, or left arrow key to
	exit the set ties operation.

Highlighting and marking items, cutting or copying, saving a preset

When an item within the program is selected, it is green highlighted. One or more highlighted items can be cut, copied, pasted, or saved as a preset. The cut, copy, and paste functions can be performed using the task bar menus (see the Alt Alt key, above) or the shortcuts described on the previous page.

NWhen an item is cut, it is not removed from its original location until it has been pasted in its new location.

Highlight multiple elements for cut, copy, paste, or a preset as follows:

1.	Use the arrow ( , , , and	) key(s) to move to the first block to
	highlight.
2.	To highlight sequential blocks:
	a. Press and hold the Shift Shift	key, then use the arrow ( , , , and )

key(s) to navigate to and highlight additional elements.

When you reach the last element you want highlighted, release the Shift Shift key.

3. To highlight non-sequential blocks:

a. Press and hold the Ctrl Ctrl key, then use the arrow (, , , and ) key(s) to navigate to the next desired element

b. Release the Ctrl Ctrl key.

c. To highlight sequential blocks, press and hold the Shift Shift key, then use the arrow (, , , and ) key to navigate to and highlight additional elements.

5-34 MPX Plus 866 A Media Presentation Matrix Switcher • Switcher Software