Extron electronic MPX Plus 866 A manual Ezg

Command/response table for basic SIS commands (continued)

Command	ASCII command	Response	Additional
	(host to switcher)	(switcher to host)	description
Names
Write preset name	EX1),X1!NG}	NmgX1),X1!]
Example:	E1,Security 1NG}	Nmg01,Security 1]	Name preset 1 “Security 1”.
Read preset name	EX1)NG}	X1!]
Example:	E2NG}	Security 2]
Write input name	EX#,X1!NI}	NmiX#,X1!]
Example:	E9,Podium cam1NI}	Nmi09,Podium cam]	Name input 9 “Podium cam”.
Read input name	EX#NI}	X1!]
Write output name	EX@,X1!NO}	NmoX@,X1!]
Example:	E1,Main PJ1NO}	Nmo01,Main PJ1]	Name output 1 “Main PJ1”.
Read output name	EX@NO}	X1!]

Lock (executive) modes

NSee “Setting the front panel locks (Executive modes)” in chapter 3, “Operation”, for more information on Lock modes.

Lock all front panel functions	1X	Exe1]	Enable Lock mode 1.
Lock advanced front panel	2X	Exe2]	Enable Lock mode 2.
functions
Unlock all front panel functions	0X	Exe0]	Enable Lock mode 0.
View lock status	X	X%]
Resets
Reset presets and names	EZG}	Zpg]	Clear all presets and their
			names.

PRELIMINARY

Reset an individual preset	EX1)ZG}	ZpgX1)]
Reset RGB delays	EZD}	Zpd]
Reset audio input levels	EZA}	Zpa]
Reset audio output levels	EZV}	Zpv]
Reset all mutes	EZZ}	Zpz]
Reset a group	EZX2)GRPM}	GrpmZX2)]

Clear preset X1).

Reset all RGB delays to

0.0 seconds.

Reset all audio input levels (gain and attenuation) to 0 dB. Reset all audio output levels (volume) to 100% (no attenuation).

Reset all video and audio mutes.

Delete all members from group X2), reset parameters and soft limits.

NSee “Group masters“, in chapter 5, “Switcher Software“, for more information about audio group masters.

Reset flash	EZFFF]	Zpf]		Reset flash memory
				(erase user-supplied files).
Reset whole switcher	EZXXX}	Zpx]		Clear all ties and presets,
				resets all audio gains to 0 dB,
				and resets the volume to 100%.
Absolute reset	EZQQQ}	Zpq]		Similar to Reset whole
				switcher, plus sets the IP
				address to 192.168.254.254
				and the subnet mask to
				255.255.0.0.
N X# = Input number		01 – 14
X@ = Output number		01 – 12 for video	01 – 06 for audio
X% = Lock mode		0 = mode 0	1 = mode 1	2 = mode 2
X1) = Preset #		32 maximum (0 = current configuration)
X1! = Name		12 characters maximum
X2) = Group master group number		01 – 32

MPX Plus 866 A Media Presentation Matrix Switcher • SIS Programming and Control 4-17