Omega Vehicle Security HH508 manual Communication

Page 17

COMMUNICATION

4612-IR232

 

RS232C CABLE

PORT

 

508BR

RS-232C "COM1"

 

1.Install the RSR232C cable between computer "COM1" and Thermometer RS232C port.

2.Turn on Thermometer.

3.Utilize the Quick BASIC for inputting programs.

4.Use the capital control letter and input "A" letter from the keyboard to start sending messages to computer.

5.Input "C" letter from the keyboard and then you can change the temperature scale.

6.Input "F" letter from the keyboards and then you can circulating select the T1 input type.

7.Input "G" letter from the keyboard and then the meter enter record mode, and then you can push "G" again to circulate through Maximum/Minimum/Average/ Record mode.

8.When you want to stop transmission mode you should push "B" letter from the keyboard in order to conserve battery life.

15

Image 17
Contents Omega Omega.comTM Introduction Safety InformationEnvironmental SpecificationsElectrical F Selecting the Temperature Scale Power SwitchHold Mode Operating Instructions9 T1 T2/T1-T2 for HH501BR/HH501BS MIN MAX record ModeREL Relative mode SET mode Relative value set and Hi/Lo Limits value set 12 Hi/Lo Limits mode Battery Replacement Operator MaintenanceClose #1 Open COM11200,E,7,1,DS,RS for Random AS #1 RS-232 Operation Using Quick BasicEND if RS-232 Transmit and Receive Comammand Summary Output Data Formats Page Communication Calibration Procedure Warranty / Disclaimer 3203/0799