Omega Vehicle Security HH508 manual Operating Instructions, Power Switch, Button, Hold Mode

Page 6

OPERATING INSTRUCTIONS

1 Power Switch

The key turns the thermometer on or off. In the MIN MAX record mode can not power off, must leave MIN MAX record mode then power off.

25 °C °F Selecting the Temperature Scale

Readings is displayed in either degrees Celsius(°C) or degrees Fahrenheit(°F). When the thermometer is turned on, it is set to the temperature scale that was in use when the thermometer was last turned off. To change the temperature scale, press the °C or °F key.

3"" Button

Press "" button to toggle on and off of backlight. The backlight will switch- off automatically after 30 seconds.

4HOLD Mode

Pressing the HOLD key to enter the Data Hold mode, the "HOLD" annun- ciator is displayed. When HOLD mode is selected, the thermometer held the present readings and stops all further measurements.

Pressing the HOLD key again to cancel HOLD mode causing thermometer to resume taking measurements.

In the MIN/MAX recording mode, press HOLD key to stop the recording. Press HOLD key again to resume recording. (Previously recorded reading are not erased).

4

Image 6
Contents Omega Omega.comTM Safety Information IntroductionSpecifications EnvironmentalElectrical Hold Mode Power SwitchF Selecting the Temperature Scale Operating InstructionsMIN MAX record Mode 9 T1 T2/T1-T2 for HH501BR/HH501BSREL Relative mode SET mode Relative value set and Hi/Lo Limits value set 12 Hi/Lo Limits mode Operator Maintenance Battery ReplacementRS-232 Operation Using Quick Basic Close #1 Open COM11200,E,7,1,DS,RS for Random AS #1END if RS-232 Transmit and Receive Comammand Summary Output Data Formats Page Communication Calibration Procedure Warranty / Disclaimer 3203/0799