Omega Vehicle Security CL3512A manual Introduction, Safety Information

Page 4

1.0 Introduction

The OMEGA® CL3512A calibrator/thermometer is two meters in one. The CL3512A simulates type J/K/T/E thermocouple signals. Each signal is adjustable by using the coarse and fine dials. The CL3512A can also be used as a dual type J/K/T/E thermocouple input thermometer. Features include a large 3½ digit display with backlighting and display selections of HOLD, °C/°F, and 0.1/1°.

The source mode of the CL3512A simulates the thermocouple output to check the operation of a thermocouple meter and make rough calibration adjustments. A more accurate calibrator would be required for calibration of thermocouple meters to specify tolerances.

1.1 Safety Information

It is recommended that you read the safety and operation instructions before using the thermometer.

WARNING

To avoid electrical shock, do not use this instrument when working

voltages at the measurement surface over 24V AC or DC.

WARNING

To avoid damage or burns, do not make temperature measurement

in microwave ovens.

CAUTION

Repeated sharp flexing can break the thermocouple leads. To prolong lead life, avoid sharp bends in the leads, especially near the connector.

1

Image 4 Omega Vehicle Security CL3512A manual Introduction, Safety Information
Contents CL3512A Digital Thermometer & Calibrator Omega.comTM Table of contents Safety Information IntroductionUnpacking Operation Proceedure Drawing of UnitDescriptions of Buttons and Switches Button Hold ModeButtons ButtonAdjust Selector SwitchInput Selections Read Mode Proceedure Source Mode Procedure Calibration Simulation Source Mode Diagram Operator Maintenance Battery ReplacementSpecifications ElectricalGeneral CL3152A Calibration Procedure Input Funtion CalibrationSimulated Output Test CL3512A Calibration Procedures Warranty / Disclaimer OMEGA...Of Course