Install the hot and cold water supply lines*
Wrap the threads on the hot and cold supply pipes with Teflon tape.
Install the hot and cold supplies to the corresponding inlets.
If | the | supplies | are |
|
not | connected to | the |
| |
correct | inlets, | the |
| |
valve cannot function |
| |||
properly! |
|
| ||
|
|
| hot inlet | cold inlet |
|
|
|
| |
Install the outlet lines*
Wrap the threads on the outlet lines with Teflon tape.
Install the lines to the outlets.
If only one outlet is to be used, do not plug the second outlet. Tie the two outlet lines together.
Both outlets must be plumbed!
*follow the manufacturer instructions when using flexible hoses.