Elo TouchSystems 2401LM user manual On-Screen Display OSD

Page 20

(for example images containing small-font text).

Your Touchmonitor will likely not require video adjustments. However, for analog VGA video, variations in video graphic card outputs may require user adjustments through the OSD to optimize the quality of the Touchmonitor’s displayed image. These adjustments are “remembered” by the Touchmonitor. Also, to reduce the need for adjustments for different video mode timings, the monitor correctly scales and displays some of the video industry’s most common video timing modes. Refer to the technical specifications for this monitor at http://www.elotouch.com for a list of these Preset Video Modes.

On-Screen Display (OSD)

Four OSD buttons are on the bottom of the monitor. These can be used to adjust various display parameters.

The buttons and their functionality are:

Button

Function when OSD is not displayed:

Function when OSD is displayed:

 

 

 

Menu

Display OSD main menu

Return to previous OSD menu

 

 

 

 

Display OSD Contrast submenu

Increase value of selected parameter /

 

select next menu item

 

 

 

Display OSD Brightness submenu

Decrease value of selected parameter /

 

select previous menu item

 

 

Select

Enter“Auto Adjust” feature(VGA mode only)

Select submenu to enter

 

 

 

Using the OSD buttons controls an on-screen graphical user interface which displays on top of your input video, allowing intuitive adjustment of the following display parameters:

 

Parameter

 

Available Adjustment

 

Contrast

Increase/decrease monitor contrast.

 

Default: best gray-shade performance

 

 

 

 

Brightness

Increase/decrease monitor brightness.

 

Default: maximum

 

 

 

 

V-position

Moves the image vertically on the display in single-pixel increments.

Default: centered.

 

 

 

Only applicable for VGA input video

 

H-position

Moves the image horizontally on the display in single-pixel increments.

Default: centered.

 

 

 

Only applicable for VGA input video

 

Recall

Selecting “Recall Defaults” restores all factory default settings for OSD-adjustable

Defaults

parameters (except OSD Language) and for Preset Video Mode timings.

 

 

 

 

User Manual 2401LM

 

© 2013 Elo Touch Solutions, Inc. All rights reserved.

 

SW200127 Rev A - Page 20 of 32

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Elo Touch Solutions 2401LM Touchmonitor SW200127 Rev aDisclaimer Trademark AcknowledgmentsSW200127 Rev a Page 3 Medical and Healthcare Application Disclaimer Classification Storag e / TransportationStorage / Transportation 10 % t o 90% Altitude O 3,000mEuropean Standards and Classifications Standards EN 60601-1-2Equipment and Systems IEC On Power SupplyElectrostatic Conducted RF Radiated RFIEC MHz to GHzTransmitter 100 Output PowerRated Maximum Table of Contents Product Description PrecautionsIntroduction Unpacking the Touch monitor InstallationConnector Panel & Interfaces Touchmonitor Connections Installing the Touch Technology Software Drivers SW200127 Rev a Page 16 Rear Vesa Mount MountingGeneral Mounting Information Ergotron Stand MountingVesa Mounting Options Power OperationTouch VideoOn-Screen Display OSD Temperature VolumePhase OSD TimeoutOSD and Power Lockouts AudioSolutions to Common Problems Problem Suggested TroubleshootingTechnical Support Technical AssistanceCare and Handling Safety & MaintenanceSafety Waste Electrical & Electronic Equipment Directive Weee Regulatory Information SW200127 Rev a Page 27 Ethers Pbde PcbaSW200127 Rev a Page 29 Warranty Information Agency Certifications Altitude Installing Software Drivers, 15 internal speakersIndex Getting in Touch with Us Check out our website
Top Page Image Contents