E&J GF0600059REVB06 manual Adjust wheel locks

Page 20

Adjust wheel locks

3/16" hex key

Note: Check the tire pressure before adjusting the wheel locks—tires should be properly inflated be- fore adjusting.

1.Place the wheel lock in the OFF (un- locked) position.

2.Loosen the wheel lock clamp: use 3/16" hex key to loosen, but not remove the two bolts that secure the wheel lock clamp to the side frame. You should be able to slide the clamp, but not pull it off the side- frame.

3.Place the wheel lock in the ON (locked) position.

4.Slide the lever assembly back until the lock is touching the tire surface.

lever bolt

clamp

lock

adjust wheel lock

5.Place the wheel lock in the OFF (unlocked) position; move the clamp 1/4 inch closer to the tire.

6.Without moving the wheel lock assembly, tighten the mounting bracket bolts.

7.Repeat steps 1-6 for other wheel lock.

Warning: After adjustment and before using wheelchair, check both wheel locks to ensure that the wheel locks will prevent the wheels from moving.

Warning: If a wheel lock becomes worn or damaged, replace it immediately.

 

 

 

20

GF0600059RevB06, November 2006

Metro Power III Owner’s Manual

Image 20
Contents Metro Power Contents Introduction II Safety Precautions MaintenanceGF0600059RevB06, November GF0600059RevB06, November Electromagnetic interference EMI from radio wave sources Important Information Powered Wheelchair Electromagnetic Interference EMIEMI Warnings III Handling Tips BalanceRamps and Inclines Reaching / bending forward or sidewardReaching / bending backward Ascent DescentIV Getting Started Power Drive System Motor and battery cablesIntegral controller JoystickON/OFF switch Battery gaugeMaximum speed / profile indicator Horn buttonOperating Instructions BatteriesVI Adjustments Arms Flip arm backAttach footrest Adjust footrest lengthFootrest-detachable, swingaway Remove footrest Adjust legrest elevation Attach elevating legrestAdjust elevating legrest footplate extension length Adjust elevating legrest pad position up or downAdjust wheel locks Guidelines to extending battery life VII BatteriesBattery Charger Battery Charger Features Battery Charger Interface Battery charger back panelAC voltage switch Line connectorAC connector Battery charger front panelBattery Charger Safety Charging the Batteries Remove and Install Batteries Remove Batteries Install Batteries Metro Power Battery connectionsBattery maintenance Clean batteries Clean battery terminalsViii Maintenance Do-it-yourself MaintenanceController Maintenance General List of ToolsCharge batteries Control system daily check JoystickConnectors Joystick bootCables MountingClean & check upholstery Clean wheelchairCheck tires Check wheel lock engagementInspect motor brushes Check bearingsIX Troubleshooting Troubleshooting, Power DriveTroubleshooting, integral controller General diagnostic guideBattery gauge diagnostic guide Battery gauge diagnostic guide tableBattery System Gauge Check / Action Lights Troubleshooting, battery charger Front output fuse panelSYMPTOMCHECK-ACTION Transporting the Metro Power ReassemblyXI Limited Warranty Warranty PeriodsGF0600059RevB06, November XII Index GF0600059RevB06, November

GF0600059REVB06 specifications

The E&J GF0600059REVB06 is a cutting-edge technology device that has garnered attention in the market due to its myriad features and robust performance characteristics. This product is designed for versatile applications, offering enhanced efficiency and convenience for users across different sectors.

One of the standout features of the E&J GF0600059REVB06 is its advanced performance capabilities. The device is powered by a high-efficiency processor that not only ensures rapid data processing but also incorporates energy-saving mechanisms. This allows the device to perform complex tasks without consuming excessive power, making it an eco-friendly option for users mindful of their energy consumption.

Equipped with state-of-the-art connectivity options, the E&J GF0600059REVB06 allows seamless integration into existing systems. It supports various communication protocols, which facilitate quick data transfer among devices. Whether connecting to a local network or the cloud, users will appreciate the flexibility this functionality offers for both personal and professional applications.

In terms of design, the E&J GF0600059REVB06 exhibits a sleek and ergonomic appearance that is both aesthetically pleasing and functional. Its compact size makes it suitable for spaces where area is limited, allowing for easy placement without sacrificing performance. Additionally, the device is built from durable materials, ensuring longevity and reliability, even in challenging environments.

The user interface of the E&J GF0600059REVB06 is another highlight. Designed with user-friendliness in mind, it features intuitive navigation that allows users to easily access various functions and settings. This simplicity ensures that even users with limited technical knowledge can operate the device efficiently.

Safety and security are paramount in the design of the E&J GF0600059REVB06. The device incorporates multiple layers of security features, protecting it from unauthorized access and data breaches. These include encryption technologies and user authentication protocols, ensuring that sensitive information remains confidential.

Overall, the E&J GF0600059REVB06 stands out in the market as a reliable, feature-rich device that meets the needs of modern users. Its blend of advanced technology, user-oriented design, and robust security features makes it an excellent choice for anyone seeking an efficient solution for their technological requirements. As such, it has become a preferred option in its category, appealing to a wide range of consumers and professionals alike.