E&J GF0600059REVB06 manual Introduction

Page 3

I Introduction

Important safety, operating, and maintenance instructions that warrant your attention are included in this owner’s manual. Read the entire manual carefully before operating your new wheelchair, and refer to it as often as necessary to help maintain good performance standards.

Consult your healthcare professional and qualified Graham-Field dealer for assistance in developing and learning safe and effective techniques to perform your daily activities according to your individ- ual physical abilities and needs, and to make certain that your wheelchair is properly prescribed and adjusted for your use.

The safety precautions in this manual are general warnings intended to be used only as basic guide- lines. You may find it necessary to develop your own methods for safely solving frequently encoun- tered challenges. Again, consult your professional medical advisors for their recommendations about safety methods, and never hesitate to ask for their assistance.

Your wheelchair should receive frequent, regularly scheduled maintenance, including an inspection of the mechanical parts, to ensure proper operation. Some suggested inspection procedures, trouble- shooting procedures, and adjustment procedures are included in this manual. When it comes to service and repair, remember that your Graham-Field dealer knows your wheelchair best.

All information and specifications in this manual are current at the time of printing. However, be- cause it is Graham-Field policy to continually improve the quality and reliability of all our products, we reserve the right to make changes at any time without notice.

Thank you for choosing an Everest & Jennings product. We at Graham-Field wish to assure you of our continuing commitment to provide innovation and quality in our product. The Metro Power III is a light duty power wheelchair with programmability features that adjust driving control parameters to best suit the user’s current driving requirements and adapt to the user's evolving needs over time. It is suitable for frequent users who require a power wheelchair fitted to their specific anatomy and best suited for indoor and limited outdoor use. Its ease of disassembly allows for easy transportation. The Metro Power III’s maximum weight capacity is 300 lb. (136 kg).

The person performing adjustments on the Metro Power III has the responsibility of making cer- tain that the user can safely operate the wheelchair with the adjustments selected. This person must evaluate the user’s ability, weight, physical condition, the environment in which the wheelchair will be used, and the terrain over which the wheelchair will travel. Graham-Field recommends the use of anti-tippers at all times.

Please note the following special statements, used throughout this manual, and their significance:

Note: Special information set off from the text.

sCaution: Damage to equipment is possible

Warning: Personal injury could occur.

 

 

 

Metro Power III Owner’s Manual

GF0600059RevB06, November 2006

 

Image 3
Contents Metro Power Contents Introduction Maintenance II Safety PrecautionsGF0600059RevB06, November GF0600059RevB06, November Electromagnetic interference EMI from radio wave sources Powered Wheelchair Electromagnetic Interference EMI EMI WarningsImportant Information Balance III Handling TipsReaching / bending forward or sideward Reaching / bending backwardRamps and Inclines Descent AscentIV Getting Started Joystick Power Drive SystemMotor and battery cables Integral controllerHorn button ON/OFF switchBattery gauge Maximum speed / profile indicatorBatteries Operating InstructionsArms Flip arm back VI AdjustmentsAdjust footrest length Footrest-detachable, swingaway Remove footrestAttach footrest Attach elevating legrest Adjust legrest elevationAdjust elevating legrest pad position up or down Adjust elevating legrest footplate extension lengthAdjust wheel locks VII Batteries Guidelines to extending battery lifeBattery Charger Interface Battery charger back panel Battery Charger Battery Charger FeaturesBattery charger front panel AC voltage switchLine connector AC connectorBattery Charger Safety Charging the Batteries Remove and Install Batteries Remove Batteries Metro Power Battery connections Install BatteriesClean battery terminals Battery maintenance Clean batteriesDo-it-yourself Maintenance Viii MaintenanceControl system daily check Joystick Controller Maintenance GeneralList of Tools Charge batteriesMounting ConnectorsJoystick boot CablesCheck wheel lock engagement Clean & check upholsteryClean wheelchair Check tiresCheck bearings Inspect motor brushesGeneral diagnostic guide IX TroubleshootingTroubleshooting, Power Drive Troubleshooting, integral controllerBattery gauge diagnostic guide table Battery gauge diagnostic guideBattery System Gauge Check / Action Lights Front output fuse panel Troubleshooting, battery chargerSYMPTOMCHECK-ACTION Reassembly Transporting the Metro PowerWarranty Periods XI Limited WarrantyGF0600059RevB06, November XII Index GF0600059RevB06, November

GF0600059REVB06 specifications

The E&J GF0600059REVB06 is a cutting-edge technology device that has garnered attention in the market due to its myriad features and robust performance characteristics. This product is designed for versatile applications, offering enhanced efficiency and convenience for users across different sectors.

One of the standout features of the E&J GF0600059REVB06 is its advanced performance capabilities. The device is powered by a high-efficiency processor that not only ensures rapid data processing but also incorporates energy-saving mechanisms. This allows the device to perform complex tasks without consuming excessive power, making it an eco-friendly option for users mindful of their energy consumption.

Equipped with state-of-the-art connectivity options, the E&J GF0600059REVB06 allows seamless integration into existing systems. It supports various communication protocols, which facilitate quick data transfer among devices. Whether connecting to a local network or the cloud, users will appreciate the flexibility this functionality offers for both personal and professional applications.

In terms of design, the E&J GF0600059REVB06 exhibits a sleek and ergonomic appearance that is both aesthetically pleasing and functional. Its compact size makes it suitable for spaces where area is limited, allowing for easy placement without sacrificing performance. Additionally, the device is built from durable materials, ensuring longevity and reliability, even in challenging environments.

The user interface of the E&J GF0600059REVB06 is another highlight. Designed with user-friendliness in mind, it features intuitive navigation that allows users to easily access various functions and settings. This simplicity ensures that even users with limited technical knowledge can operate the device efficiently.

Safety and security are paramount in the design of the E&J GF0600059REVB06. The device incorporates multiple layers of security features, protecting it from unauthorized access and data breaches. These include encryption technologies and user authentication protocols, ensuring that sensitive information remains confidential.

Overall, the E&J GF0600059REVB06 stands out in the market as a reliable, feature-rich device that meets the needs of modern users. Its blend of advanced technology, user-oriented design, and robust security features makes it an excellent choice for anyone seeking an efficient solution for their technological requirements. As such, it has become a preferred option in its category, appealing to a wide range of consumers and professionals alike.