E&J GF0600059REVB06 manual GF0600059RevB06, November

Page 6

Warning: Do not switch programmer into PROGRAM mode while wheelchair is mov- ing.

Warning: Do not disconnect the wheelchair batteries while the programmer is con- nected to the integral controller.

Warning: Do not use any adaptive control devices other than those provided or rec- ommended by Graham-Field.

Warning: Do not connect accessories to the batteries; it will decrease driving range

and shorten battery life. Do not connect ANYTHING to only one battery; this will cause premature battery failure.

Warning: Never connect a respirator or other life-support device to the wheelchair batteries, since it will shorten the battery operating time. This could cause an unan- ticipated failure of both the wheelchair and the life-support equipment.

Warning: Unauthorized modification could create a hazardous condition, which could result in serious injury.

Warning: The use of non-Graham-Field replacement parts could create a hazardous condition, which could result in serious injury.

Warning: Standard weight capacity for the Metro Power III wheelchair is 300 lb. (136 kg).

Warning: Do not tow any loads or “piggyback” passengers or heavy packages.

Warning: Keep all cables away from the moving parts of the wheelchair.

Warning: As a safety feature, this wheelchair is equipped with fail-safe electrome- chanical park brakes. Any interruption in the power supply will cause these brakes to immediately engage and stop the wheelchair. If the occupant is not properly positioned, an unanticipated stop could pitch the occupant forward and out of the wheelchair. Review the owner’s manual and consult with your dealer regarding proper positioning and use of this wheelchair.

Warning: Graham-Field specifically disclaims responsibility for any bodily injury or property damage which may occur during any use which does not comply with fed- eral, state or local laws or ordinances.

 

 

 

 

GF0600059RevB06, November 2006

Metro Power III Owner’s Manual

Image 6
Contents Metro Power Contents Introduction II Safety Precautions MaintenanceGF0600059RevB06, November GF0600059RevB06, November Electromagnetic interference EMI from radio wave sources Powered Wheelchair Electromagnetic Interference EMI EMI WarningsImportant Information III Handling Tips BalanceReaching / bending forward or sideward Reaching / bending backwardRamps and Inclines Ascent DescentIV Getting Started Integral controller Power Drive SystemMotor and battery cables JoystickMaximum speed / profile indicator ON/OFF switchBattery gauge Horn buttonOperating Instructions BatteriesVI Adjustments Arms Flip arm backAdjust footrest length Footrest-detachable, swingaway Remove footrestAttach footrest Adjust legrest elevation Attach elevating legrestAdjust elevating legrest footplate extension length Adjust elevating legrest pad position up or downAdjust wheel locks Guidelines to extending battery life VII BatteriesBattery Charger Battery Charger Features Battery Charger Interface Battery charger back panelAC connector AC voltage switchLine connector Battery charger front panelBattery Charger Safety Charging the Batteries Remove and Install Batteries Remove Batteries Install Batteries Metro Power Battery connectionsBattery maintenance Clean batteries Clean battery terminalsViii Maintenance Do-it-yourself MaintenanceCharge batteries Controller Maintenance GeneralList of Tools Control system daily check JoystickCables ConnectorsJoystick boot MountingCheck tires Clean & check upholsteryClean wheelchair Check wheel lock engagementInspect motor brushes Check bearingsTroubleshooting, integral controller IX TroubleshootingTroubleshooting, Power Drive General diagnostic guideBattery gauge diagnostic guide Battery gauge diagnostic guide tableBattery System Gauge Check / Action Lights Troubleshooting, battery charger Front output fuse panelSYMPTOMCHECK-ACTION Transporting the Metro Power ReassemblyXI Limited Warranty Warranty PeriodsGF0600059RevB06, November XII Index GF0600059RevB06, November

GF0600059REVB06 specifications

The E&J GF0600059REVB06 is a cutting-edge technology device that has garnered attention in the market due to its myriad features and robust performance characteristics. This product is designed for versatile applications, offering enhanced efficiency and convenience for users across different sectors.

One of the standout features of the E&J GF0600059REVB06 is its advanced performance capabilities. The device is powered by a high-efficiency processor that not only ensures rapid data processing but also incorporates energy-saving mechanisms. This allows the device to perform complex tasks without consuming excessive power, making it an eco-friendly option for users mindful of their energy consumption.

Equipped with state-of-the-art connectivity options, the E&J GF0600059REVB06 allows seamless integration into existing systems. It supports various communication protocols, which facilitate quick data transfer among devices. Whether connecting to a local network or the cloud, users will appreciate the flexibility this functionality offers for both personal and professional applications.

In terms of design, the E&J GF0600059REVB06 exhibits a sleek and ergonomic appearance that is both aesthetically pleasing and functional. Its compact size makes it suitable for spaces where area is limited, allowing for easy placement without sacrificing performance. Additionally, the device is built from durable materials, ensuring longevity and reliability, even in challenging environments.

The user interface of the E&J GF0600059REVB06 is another highlight. Designed with user-friendliness in mind, it features intuitive navigation that allows users to easily access various functions and settings. This simplicity ensures that even users with limited technical knowledge can operate the device efficiently.

Safety and security are paramount in the design of the E&J GF0600059REVB06. The device incorporates multiple layers of security features, protecting it from unauthorized access and data breaches. These include encryption technologies and user authentication protocols, ensuring that sensitive information remains confidential.

Overall, the E&J GF0600059REVB06 stands out in the market as a reliable, feature-rich device that meets the needs of modern users. Its blend of advanced technology, user-oriented design, and robust security features makes it an excellent choice for anyone seeking an efficient solution for their technological requirements. As such, it has become a preferred option in its category, appealing to a wide range of consumers and professionals alike.